Sony Corporation DWM02N Manuel D’Utilisation

13

Using wireless remote control, this function can be 
controlled from the receiver and other devices.

The frequency of the low-cut filter can be set.

OFF: Turns off the low-cut filter.
20 30 40 50 60 70 80 90 100
120 140 160 180 200 220 (Hz): Low-cut filter is set 
according to the selected frequency.

Using wireless remote control, this function can be 
controlled from the receiver and other devices.

To conserve power, this setting allows you to put all 
microphone functions to sleep.

ACTIVE: The microphone operates normally.
SLEEP: The sleep function is on. During sleep, the 
POWER indicator flashes at 2-second intervals.

During sleep, press the SET, +, or – button.

You can also use the wireless remote control to change the 
receiver back to normal operation.

 

If the microphone is turned off while power save setting is 
set to “SLEEP”, the setting will change to “ACTIVE” 
automatically.

Set this item according to the type of batteries you use to 
obtain accurate battery power status indication.

TYPE1: The power status is indicated based on 
characteristics of new LR6 (size AA) Sony Alkaline 
batteries. Select this for LR6 (size AA) alkaline batteries.
TYPE2: Select this for rechargeable nickel-metal-hydride 
batteries.
TYPE3: Select this for lithium batteries.

 

The characteristics of batteries change according to battery 
type and environmental conditions. It is recommended that 
you learn the characteristics of batteries you use before 
using them.

You can display the accumulated battery use time as a 
rough estimate of total microphone usage.
The factory setting is “00:00”.

Hold down the SET button until the time indication 
flashes.

Press the – button so “00:00 RESET” appears, and 
then press the SET button.

Using wireless remote control, this function can be 
controlled from the receiver and other devices.

You can set the encrypted transmission function.

SECURE KEY: Sets the secure key method.
PASSWORD: Sets the password method.
OFF: The encrypted transmission function is not used.

For details, see “Using the Encrypted Transmission 
Function” on page 9.

MODE1: This audio codec mode is compatible with the 
first generation DWX series.

MIC

0

–52

–16

36

3

–49

–13

6

–46

–10

9

–43

–7

3 dB steps

3 dB steps

3 dB steps

45

–7

+2

48

–4

+5