Sony Corporation MHCV11 Manuel D’Utilisation

Page de 44
30
GB
MHC-
MHC-V11.4-582-493-11(1)
 Enjoying the Party Chain
Plug in the AC power cord 
and turn on all the systems.
Adjust the volume on each 
system.
 Activate the Party Chain 
function on the system to be 
used as the Party Host.
Example: When using this system 
as the Party Host
 Press FUNCTION repeatedly to 
select the function you want.
When you connect using 
 
(page 28), do not select the 
Audio In function. If you select 
this function, the Party Chain 
function cannot be activated.
 Start playback, then hold down 
MEGA BASS on the unit.
“PARTY CHAIN MASTER” appears 
on the display. The Party Host 
starts the Party Chain, and other 
systems become Party Guests 
automatically. All systems play 
the same music as that being 
played by the Party Host.
Notes
 
• Depending on the total unit of systems 
you have connected, Party Guests may 
take some time to start playing the music.
 
• Changing the volume level and sound 
effect on the Party Host will not affect the 
output on the Party Guests.
 
• The Party Guests continue playing the 
music source from the Party Host even 
if you change the function on any of the 
Party Guests. However, you can adjust the 
volume and change the sound effect on 
any of the Party Guests.
 
• When you use the microphone on Party 
Host, the sound will not be output from 
Party Guests.
 
• When one of the systems in the chain 
is performing USB transfer, wait for the 
system to complete or stop the transfer 
before you activate the Party Chain 
function.
 
• For detailed operation on other systems, 
refer to the operating instructions of the 
systems.
 To select a new Party Host
Repeat step 3 of “Enjoying the Party 
Chain” on the system to be used as a 
new Party Host. The current Party Host 
becomes Party Guest automatically. All 
systems play the same music as that 
being played by the new Party Host.
Notes
 
• You can select another system as the 
new Party Host only after the Party Chain 
function of all the systems in the chain 
has been activated.
 
• If the selected system does not become a 
new Party Host after a few seconds, repeat 
step 3 of “Enjoying the Party Chain.”
To deactivate the Party Chain
When using this system as the Party 
Host, hold down MEGA BASS on the 
unit.
When using another system as the 
Party Host, press PARTY CHAIN on the 
Party Host.
Note
If the Party Chain function is not deactivated 
after a few seconds, perform the above 
operation on the Party Host again.
Singing along: Karaoke
 Preparing for Karaoke
Turn MIC LEVEL on the 
unit to MIN to reduce the 
microphone volume level.
Microphone volume range
Connect an optional 
microphone to MIC 1 or MIC 2 
jack on the unit.
Connect another optional 
microphone if you want to sing in 
duet.
 St
an
vo
re
ef
St
m
Note
 
• Kara
micr
USB 
 
• If ho
 
— m
sy
 
— ch
m
 
— lo
 
— pr
or
th
 
• Micr
to th
 Usin
You c
in ste
Press
to se
To ca
VOCA
“V,FA
Note
To use
functio
conne
 Cha
Press
your
mod