Sony Corporation PCMD10 Manuel D’Utilisation
PCM-D10 4-744-528-11(1)
39
Rec
o
rding
PCM-D10 4-744-528-11(1)
Recording with the external
microphone connected to the
XLR/TRS jack(s)
microphone connected to the
XLR/TRS jack(s)
You can connect an external microphone
(commercially available) to the XLR/TRS jack
on the linear PCM recorder and use it for
recording.
(commercially available) to the XLR/TRS jack
on the linear PCM recorder and use it for
recording.
1
Slide the phantom power switch(es)
to “OFF.”
to “OFF.”
2
Connect an external microphone to
the XLR/TRS jack(s) on the linear PCM
recorder.
the XLR/TRS jack(s) on the linear PCM
recorder.
To record in stereo, connect the microphone
to both of the XLR/TRS jacks for the left (L)
and right (R) channels.
to both of the XLR/TRS jacks for the left (L)
and right (R) channels.
To record in monaural, connect it to the
XLR/TRS jack for the left (L) channel.
XLR/TRS jack for the left (L) channel.
Adjust the position of the microphone.
For the characteristics of the microphone,
refer to the operating instructions supplied
with it.
For the characteristics of the microphone,
refer to the operating instructions supplied
with it.
External microphone
(commercially available)
(commercially available)
To the XLR/TRS jack
3
Slide the INPUT switch to “XLR/TRS.”
4
Slide the XLR/TRS INPUT LEVEL switch
to “MIC.”
to “MIC.”
When the microphone is connected to
both of the XLR/TRS jacks for the left
(L) and right (R) channels, slide both of
the switches for the left (L) and right (R)
channels.
both of the XLR/TRS jacks for the left
(L) and right (R) channels, slide both of
the switches for the left (L) and right (R)
channels.
5
If the connected external microphone
supports phantom power, slide the
phantom power switch(es) to “ON.”
supports phantom power, slide the
phantom power switch(es) to “ON.”
Power is supplied to the connected
microphone.
microphone.
6
Follow steps 3 through 7 in “Recording
using the built-in microphones” (page
31) to start recording.
using the built-in microphones” (page
31) to start recording.
7
To record in monaural, press the
OPTION button while recording is
on standby to display the OPTION
menu, select “Stereo/Monaural”
OPTION button while recording is
on standby to display the OPTION
menu, select “Stereo/Monaural”
“Monaural (L),” and then press the
à
button.
Note
• If a device is connected to the XLR/TRS jack(s),
and if the left, right, or both the left and right
XLR/TRS INPUT LEVEL switch(es) are set to the
“LINE” position, the LIMITER and LCF(Low Cut)
functions do not work.
XLR/TRS INPUT LEVEL switch(es) are set to the
“LINE” position, the LIMITER and LCF(Low Cut)
functions do not work.
• Before connecting or disconnecting an external
microphone or device, make sure that the phantom
power switch is placed in the “OFF” position. If you
plug or unplug the cable of the connected device
while the switch is placed in the “ON” position, it
may produce a loud noise or cause the device to
malfunction.
power switch is placed in the “OFF” position. If you
plug or unplug the cable of the connected device
while the switch is placed in the “ON” position, it
may produce a loud noise or cause the device to
malfunction.
• While the phantom power switch is placed in the
“ON” position, the linear PCM recorder consumes
more power. When you do not intend to use an
external microphone with phantom power support,
slide the switch to “OFF.”
more power. When you do not intend to use an
external microphone with phantom power support,
slide the switch to “OFF.”