Sony Corporation UTXB03 Manuel D’Utilisation
Name and Function of Parts
11
Plug-on transmitter (UTX-P03)
a Audio input connector (XLR type)
Connect to a microphone or the line output of an audio
mixer or other device.
mixer or other device.
b +48V (+48 V supply) indicator
Lights up when the unit is set to MIC input and is
supplying power to the connected microphone.
supplying power to the connected microphone.
c POWER indicator
Displays the battery level and charging status.
d AUDIO (audio input level) indicator
Turns on or off according to the audio input level as
follows.
On (red): Audio input level is too high. If the sound is
distorted, adjust the attenuation level to decrease the
audio input level (page 27).
On (green): Audio input level is appropriate.
Off: There is no audio input or input level is too low.
Flashing (orange): Audio is muted (i.e., disabled).
follows.
On (red): Audio input level is too high. If the sound is
distorted, adjust the attenuation level to decrease the
audio input level (page 27).
On (green): Audio input level is appropriate.
Off: There is no audio input or input level is too low.
Flashing (orange): Audio is muted (i.e., disabled).
e POWER/MUTING button
Turns the power on/off. You also use this button to turn
the muting function on/off.
the muting function on/off.
f Display section
A
RF transmission indicator
Displays the current transmission status.
B
RF transmission power indicator
Indicates the current transmission power setting. You can
change the setting with the RF transmission power setting
function.
change the setting with the RF transmission power setting
function.
For details on the RF transmission power setting
function, see “Setting the transmit output level (RF
POWER)” (page 27).
function, see “Setting the transmit output level (RF
POWER)” (page 27).
C
Audio input level meter
Displays the audio input level.
D
Peak indicator
Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.
distortion begins as a warning of excessive input level.
Indicator display Status
On (green)
Sufficient battery level
Flashing (green)
Battery is getting low
On (orange)
Charging (when nickel metal hydride
rechargeable batteries are inserted
and power is turned off)
rechargeable batteries are inserted
and power is turned off)
Flashing (red)
Charging not possible (when batteries
other than rechargeable nickel metal
hydride batteries are inserted or the
nickel metal hydride batteries are
deteriorated)
other than rechargeable nickel metal
hydride batteries are inserted or the
nickel metal hydride batteries are
deteriorated)
Disconnect the USB cable, and
replace the batteries.
replace the batteries.
Off
Power is off or battery is empty
Front
Bottom
Note
Function
Operation
Supply ON
Press button for one second or longer
Supply OFF
Press button until the indicator turns
off
off
Muting ON
Press button
Muting OFF
: Transmitting
– : Transmission stopped