Kenwood USA Corporation 33293110 Manuel D’Utilisation
8
GETTING STARTED
1
1
1
1
1
Switch the Power ON.
Switch the transceiver power ON by turning the Power
switch/ Volume control clockwise.
switch/ Volume control clockwise.
•
A confirmation tone sounds.
To switch the transceiver power OFF, turn the Power
switch/ Volume control fully counterclockwise, until a click
sounds.
switch/ Volume control fully counterclockwise, until a click
sounds.
2
2
2
2
2
Adjust the Volume.
Set your desired volume level by rotating the Power
switch/ Volume control.
switch/ Volume control.
•
Clockwise increases the volume and counterclockwise
decreases the volume.
decreases the volume.
Note: To adjust the volume using background noise as a reference,
use the monitor function (page 13).
use the monitor function (page 13).
3
3
3
3
3
Select a Channel.
Select your desired channel (1 ~ 8) by pressing the
▲
or
▼
key.
•
A confirmation tone sounds each time you press the
▲
or
▼
key.
•
When you receive a call on your selected channel, you will
hear audio from the speaker and the LED will light green.
hear audio from the speaker and the LED will light green.
•
The channel you selected may be programmed with a
signalling code. Refer to “QUIET TALK/ DIGITAL QUIET
TALK” on page 10.
signalling code. Refer to “QUIET TALK/ DIGITAL QUIET
TALK” on page 10.
•
Refer to page 26 for the frequencies of each channel.