BearExtender BE010 Manuel D’Utilisation
Step 2: Disable your Built-in Wi-Fi card
If your computer has a built-in Wi-Fi card, please disable it.
Some laptops have a ON/OFF switch for disabling the built-in Wi-Fi
card. If your computer does not have a switch, go to Control Panel >
Network and Sharing > “Change Adapter Settings”.
card. If your computer does not have a switch, go to Control Panel >
Network and Sharing > “Change Adapter Settings”.
Then right-click your built-in Wi-Fi card and click “Disable.”
You can repeat this step and select “Enable” when you wish to use
your internal Wi-Fi card again.
You can repeat this step and select “Enable” when you wish to use
your internal Wi-Fi card again.
Step 3: Scan and Join a Network
Because BearExtender uses the
built-in Windows interface for
connecting to wireless networks,
there is no new software to learn.
built-in Windows interface for
connecting to wireless networks,
there is no new software to learn.
Simply click on the Network icon
located in the bottom right corner
located in the bottom right corner
of your screen (
or
).
A list of nearby networks will
appear.
appear.
Select your network and click
“Connect.” You will be asked for a
password if required.
“Connect.” You will be asked for a
password if required.
Click the Network icon near the
clock so show nearby networks.
clock so show nearby networks.