International Business Machines Corporation 35H3636 Manuel D’Utilisation
Error Code
Explanation and Action
IBMTOKEN-xx-207
The configuration parameter values have forced the
internal data blocks to exceed the allowed limit.
internal data blocks to exceed the allowed limit.
Explanation:
The combination of configuration parameters
being used requires more than the 64–KB
memory area that is available for this adapter
instance to hold its internal control
information.
being used requires more than the 64–KB
memory area that is available for this adapter
instance to hold its internal control
information.
User Action:
Lower the value of the MaxTransmits or
MinRcvBuffs parameters from their current
setting to reduce the amount of control block
storage required by the device driver. Shut
down and restart to activate this configuration
change.
MinRcvBuffs parameters from their current
setting to reduce the amount of control block
storage required by the device driver. Shut
down and restart to activate this configuration
change.
IBMTOKEN-xx-208
Unable to register interrupt level
xxx for this adapter.
Explanation:
The hardware interrupt level assigned to this
adapter was not able to be registered (or
hooked) by the device driver.
adapter was not able to be registered (or
hooked) by the device driver.
User Action:
Check the configuration of your computer,
looking for other devices that are assigned
the same interrupt level as this adapter. Try
removing the conflicting device from the
machine and restart the computer to see if
the problem goes away. If so, then determine
if he conflicting device can be left out of the
machine, or if the machine can be
reconfigured to resolve the conflict. Note that
in most machines, the BIOS assigns certain
system resources to the devices found in the
computer, including the interrupt level.
looking for other devices that are assigned
the same interrupt level as this adapter. Try
removing the conflicting device from the
machine and restart the computer to see if
the problem goes away. If so, then determine
if he conflicting device can be left out of the
machine, or if the machine can be
reconfigured to resolve the conflict. Note that
in most machines, the BIOS assigns certain
system resources to the devices found in the
computer, including the interrupt level.
IBMTOKEN-xx-210
A hardware failure occurred while attempting to open
the adapter.
the adapter.
Explanation:
An adapter hardware error was detected
when opening the adapter for network
operation.
when opening the adapter for network
operation.
User Action:
Run the adapter diagnostics program to
isolate the problem and contact your
customer service center. If no problem was
identified by the diagnostics, check that the
cable is attached securely to both the adapter
and the network interface (wall plate). Turn
the computer off and then on again to restart
the machine. If the problem persists, contact
your customer service center.
isolate the problem and contact your
customer service center. If no problem was
identified by the diagnostics, check that the
cable is attached securely to both the adapter
and the network interface (wall plate). Turn
the computer off and then on again to restart
the machine. If the problem persists, contact
your customer service center.
52
Turbo 16/4 Token-Ring PC Card 2