RELM Communications Inc RPU499A Manuel D’Utilisation
30
12 480 √
√
√
√
45.05
1
480
470
490
13 490 √
√
√
√
√
46.35
1
490
480
500
14 360 √
√
46.35
1
360
350
370
15 380 √
√
45.05
1
380
370
390
Note: About busy channel lockout
*
1: Transmission is prohibited if a signal appears with incompatible CTCSS/CDCSS;
*
2: Transmission is prohibited if a signal appears with incompatible CTCSS/CDCSS or DTMF/2-Tone.
ALL RESET MODE
Operation
1. Turn POWER ON while pressing [LAMP] and [
○
] key, in about 2 seconds, the radio enters the Dealer Mode.
2. In dealer mode, press [PTT] and [
□
] key simultaneously to enter All Reset Mode. The EEPROM data is reset. No
change displays on LCD, and red LED glows.
3. The LED turns off when All Reset is completed.
PC MODE
Connection procedures
1. Connect the radio of RPV599APlus/RPU499APlus to the personal computer with an interface cable.
2. Run the program on the computer and Turn ON the power of the radio.
3. You can read, programme or adjust the radio via RPV599APlus/RPU499APlus programming software.
Please refer to “RPV599APlus/RPU499APlus Editing Software User Manual” for details.
2. Run the program on the computer and Turn ON the power of the radio.
3. You can read, programme or adjust the radio via RPV599APlus/RPU499APlus programming software.
Please refer to “RPV599APlus/RPU499APlus Editing Software User Manual” for details.
Red LED on
Red LED off
All Reset Complete
All Reset
Dealer Mode
[PTT]+[LO]
[PTT]+[
□