Global Power International Group Ltd. AA12001 Manuel D’Utilisation
SP4000 Wi-Fi ADAPTOR USER MANUL
Product Name: Wi-Fi ADAPTOR
Model Name: SP4000
Brand Name:
Model Name: SP4000
Brand Name:
Global Power International
SP4000 Wi-Fi Adaptor is a signal converter box which able to convert wireless transmission data comes
from Wi-Fi Phone to electrical signal, than deliver the signal to Main Controller and Light Controller.
Main Controller can also convert its status through SP4000 Wi-Fi Adaptor and transfer back to Wi-Fi
Phone.
Phone.
Connection for cables:
Power off the control box
Red: To control box
Green / Yellow : To control Panel
Blue: To DCU (Yellow socket)
Power on the control box
This equipment has been tested and
found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide to provide reasonable protection against harmful interference in a
found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the installation, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular
installation. if this equipment does cause harmful interference to radio or television reception, which
not installed and used in accordance with the installation, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular
installation. if this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
-Consult the dealer or an experienced radio / TV technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
To comply with FCC RF exposure compliance requirements, for a separation distance of at least 20cm
must be maintained between this device and all persons.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
To comply with FCC RF exposure compliance requirements, for a separation distance of at least 20cm
must be maintained between this device and all persons.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired
operation.