E F Johnson Company 2425795 Manuel D’Utilisation
5-26
Viking™ VP600 Portable Radio Operating Manual
Conventional Mode Features
2 Scroll through the list to view up to 5 calls, in order from most recent to least recent.
5.13.12 Messaging
The messaging feature allows pre programmed messages to be sent to a dispatcher on P25
channels. Up to 255 messages can be pre programmed, and they are identified by an alias.
If a Message option button or menu parameter is programmed, messages are sent as
follows:
channels. Up to 255 messages can be pre programmed, and they are identified by an alias.
If a Message option button or menu parameter is programmed, messages are sent as
follows:
1 Momentarily press the Message option button or select that menu parameter. The alias
of the last message sent is displayed.
2 If required, press the Up/Down buttons to display the desired message. Then send the
message by pressing the
(Menu) button or momentarily pressing the PTT switch.
One of the following events then occurs:
- If five beeps sound and “Ack Received” is displayed, the message was received and
automatically acknowledged by the system.
- If after five tries the message is not acknowledged, a tone sounds and “Msg Failed” is
displayed.
Note
A smart console with message receiving capabilities must be used to receive messages.
5.13.13 Status Messaging
The status messaging feature allows you to manually or automatically send your current
status to your dispatcher on P25 channels. Up to 255 status conditions can be pre
programmed, and they are identified by an alias. If the Status option button or menu
parameter is programmed, status conditions are sent as follows:
status to your dispatcher on P25 channels. Up to 255 status conditions can be pre
programmed, and they are identified by an alias. If the Status option button or menu
parameter is programmed, status conditions are sent as follows:
1 Momentarily press the Status option button or select that menu parameter. The alias of
the current status condition is displayed.
2 To change the current status, press the Up/Down buttons until the desired status is
displayed. Then to send the status, press the
(Menu) button or momentarily press
the PTT switch. One of the following events then occurs:
- If five beeps sound and “Ack Received” is displayed, the status was received and
acknowledged by the system.
- If after five tries the message is not acknowledged, a tone sounds and “Status Fail” is
displayed.
Note
A smart console with message receiving capabilities must be used to receive status
messages.
messages.