Honeywell International Inc. WFSSD Manuel D’Utilisation
PRELIMINARY: Notifier Wireless Sensor Network — P/N LS10036-000NF-E:N0 10/10/2013
47
Device Operations
Devices
Duration of LED state
All units are in seconds. Minute is indicated by M.
Example:
Legend
LED color
No. of blinks
Interval between blink patterns
Approximate duration
Will transition to next state after
30 min (approx)
30 min (approx)
First blink is green. Second is yellow
Two blinks in this pattern
7 sec between blink patterns
7
M
30
Condition
Action Required
LED Pattern
Device is factory default
Use PC tool to assign
profile or activate switch
to search for profile
profile or activate switch
to search for profile
Device is factory default
and requesting a profile
from a distributor or
gateway
and requesting a profile
from a distributor or
gateway
Clear the tamper
condition within 1 minute
to enter site survey
condition within 1 minute
to enter site survey
Device is factory default
and is ready to enter site
survey
and is ready to enter site
survey
Pending site survey
5
1
M
Waiting for profile
10
Searching for profile
0.5
1
M
Device has failed internal
self diagnostics
self diagnostics
Self test fail
Device is in a configura-
tion state.
tion state.
Restart the device. If
problem persists. Contact
customer support
problem persists. Contact
customer support
Restart the device. If
problem persists. Contact
customer support
problem persists. Contact
customer support
Device has a profile and
can be set as distributor or
have profile removed
can be set as distributor or
have profile removed
Set code wheel pattern to
enter the desired mode
enter the desired mode
Minimum of 6 months
battery life remaining
battery life remaining
Profile is assigned and
device is searching for the
mesh
device is searching for the
mesh
Ensure the mesh is in
rescue mode or wait for
timeout to search mesh in
formation mode
rescue mode or wait for
timeout to search mesh in
formation mode
Solid
Factory
Command
Command
1
Profile
modification
modification
5
1
Battery Check - All
batteries are present
batteries are present
Solid
2.5
Searching for mesh
(in rescue mode)
(in rescue mode)
90
3
Ensure the mesh is in
formation mode
formation mode
Profile is assigned and
device is searching for the
mesh
device is searching for the
mesh
Mesh is formed and
initializing
initializing
Searching for
mesh (in formation
mode)
mesh (in formation
mode)
20
1st Mesh
optimization
optimization
2.5
7