Xiamen Puxing Electronics Science & Technology Co. Ltd. PXDZ800V002 Manuel D’Utilisation
Introduction
Powering UP the Radio
Rotate the On/Off/Volume Control Knob clockwise until you hear a click. The LED
blinks green and the Home screen lights up if the backlight setting is set to turn on
automatically.
NOTE: The Home screen does not light up during a power up if the LED indicator is
disabled. A brief tone sounds, indicating that the power up test is successful. There is
no power up tone if the radio tones/alerts function is disabled. To turn off the radio,
rotate this knob counterclockwise until you hear a click.
Adjusting the Volume
To increase the volume turn the On/Off/Volume Control Knob clockwise.
To decrease the volume, turn this knob counterclockwise.
Function Introduction
1. Making and Receiving Calls
Selecting a Zone
A zone is a group of channels. Your radio supports up to 250 zones, with a maximum
of 16 channels per zone.
Use the following procedure to select a zone.
1. Press 【MENU】 to access the menu.
2. Press to Zone and press
to select
3. The current zone is displayed and indicated by a zone name.
4. Press to the required zone then press
to
select.
5. The display shows [Zone] selected momentarily and returns to the
selected zone screen.
Selecting a RADIO Channel, Subscriber ID, or Group ID
Once the required zone is displayed (if you have multiple zones in
your radio), turn the programmed Channel selector Knob to select the
channel, subscriber alias or ID, or group alias or ID.
or
or
Speaker/Microphone
/port cover