Clarion FZ501 Manuel D’Utilisation

19

English

ERROR 2

Do not support iPod & iPhone.

Change another device.

* The head unit will return to 

RADIO mode.

If an error occurs, one of the following displays is displayed. 

Take the measures described below to solve the problem.

If an error display other than the ones described above appears, press the Reset button. If the 

problem persists, turn off the power and consult your store of purchase.

*   When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory 

are cleared.

USB device cannot 

be inserted.

The USB device has been 

inserted with wrong direction.

Reversing the connection direction of the USB 

device, try it again.

The USB connector is broken.

Replace with a new USB device.

USB device is not 

recognized.

The USB device is damaged.

Disconnect the USB device and reconnect. If 

the device is still not recognized, try replacing 

with a different USB device.

Connectors are loose.

No sound heard 

with the display “

File” shown.

No MP3/WMA file is stored in 

the USB device.

Store these files properly in the USB device.

Sound skips or is 

noisy.

MP3/WMA files are not encoded 

properly.

Use MP3/WMA files encoded properly.

C a n n o t   p a i r   t h e  

Bluetooth  enabled 

device with the car 

audio system.

The device does not support the 

profiles required for the system. Use another device to connect.
The  Bluetooth  function  of  the 

device is not enabled.

Refer to the user manual of the device for how 

to enable the function.

The  audio  quality 

i s   p o o r   a f t e r 

connection  with  a 

Bluetooth-enabled 

device.

The microphone is not correctly 

positioned.

Adjust the position of the microphone.

For example, stick the microphone onto the 

dashboard where close to the driver.

The Bluetooth reception is poor.

Move the device closer to the car audio system 

or remove any obstacle between the device 

and the system.