Clarion FZ501 Manuel D’Utilisation

English

8

Turn the 

[CONTROL] knob on the front 

panel.

The adjustable range of volume is 0 to 40.

Press 

[CONTROL] knob on the front panel 

repeatedly to choose desired playing source.

•  Playing source selection means selecting 

work mode, such as 

HD RADIO mode, 

and 

AUX mode, etc.

Press the 

[DISP] button on the remote 

control to switch the display information, 

system time and playing source.

* When the 

[RESET] button is pressed,

frequencies of radio stations, titles, etc.

stored in memory are cleared.

•  Refer to the diagrams in “3. CONTROLS” 

when reading this chapter.

•  Start the engine before using this unit.

•  Be careful about using this unit for a long 

time without running the engine. If you 

drain the car’s battery too far, you may not 

be able to start the engine and this can 

reduce the service life of the battery.

1.  Start the engine. The power button / knob 

illumination on the unit will light up.

                 

Engine ON 

position

2.  Press the 

[CONTROL] knob on the front 

panel to turn on the power under standby 

mode. The unit goes back to the last 

status after power on.

3.  Press the 

[CONTROL] knob on the front 

panel to turn off the power.

Press the 

[MUTE] button on the remote 

control to mute the volume from the unit.

: 

Doing the operation above again or adjusting 

volume will release muting.