HARRIS CORPORATION TR-382-A2 Manuel D’Utilisation
27
Pressing the MONITOR button unsquelches the
receiver for the first three (3) seconds the button is
held. All transmissions will be heard, even if
Channel Guard protected. If it is held for more than
three (3) seconds, the Channel Guard decoder will
be toggled on or off (if programmed for the selected
channel).
receiver for the first three (3) seconds the button is
held. All transmissions will be heard, even if
Channel Guard protected. If it is held for more than
three (3) seconds, the Channel Guard decoder will
be toggled on or off (if programmed for the selected
channel).
SENDING A MESSAGE
1. Turn the radio on and select the desired operating
channel as described in
RECEIVING A
MESSAGE.
2. Press the MONITOR button to determine if the
channel is in use or observe the TX/CAS LED
which shows green if the channel is busy.
which shows green if the channel is busy.
Never
interrupt another transmission.
3. Hold the radio so the antenna is vertical and press
and hold the PTT button when you are ready to
transmit. Speak directly into the grill or across the
face of the radio or external microphone. Release
the PTT button when you are finished talking.
Messages cannot be received and heard when the
PTT button is pressed.
transmit. Speak directly into the grill or across the
face of the radio or external microphone. Release
the PTT button when you are finished talking.
Messages cannot be received and heard when the
PTT button is pressed.
NOTE