HARRIS CORPORATION TR-382-A2 Manuel D’Utilisation
44
EMERGENCY OPERATION
If enabled by pre-programming, GE-STAR
emergency signaling can be transmitted when the
Emergency button is pressed and held for one second.
This Emergency GE-STAR ID can be pre-programmed
to be sent on the channel selected by the CHANNEL
SELECT control or a pre-programmed Home Channel.
The red TX indicator will light and the radio proceeds
to transmit the Emergency GE-STAR ID for the
programmed time interval and number of times (1 to 15
or unlimited, pre-programmed). If programmed for
unlimited times, the emergency operation will continue
until the battery is dead or the radio is turned OFF and
then back ON.
Emergency button is pressed and held for one second.
This Emergency GE-STAR ID can be pre-programmed
to be sent on the channel selected by the CHANNEL
SELECT control or a pre-programmed Home Channel.
The red TX indicator will light and the radio proceeds
to transmit the Emergency GE-STAR ID for the
programmed time interval and number of times (1 to 15
or unlimited, pre-programmed). If programmed for
unlimited times, the emergency operation will continue
until the battery is dead or the radio is turned OFF and
then back ON.
Should the Emergency GE-STAR button be
pressed when the radio is in scanning operation, the
radio will stop scanning, perform the transmission of
the GE-STAR ID emergency signaling and then
resume normal operation.
radio will stop scanning, perform the transmission of
the GE-STAR ID emergency signaling and then
resume normal operation.
The emergency state can be cleared by turning the
radio off and then back on.