HARRIS CORPORATION TR-386-A2 Manuel D’Utilisation
9
SCAN
M
S P1 SCAN
P2
CG PG
ON/OFF/VOLUME
CHANNEL
SELECTOR
INCREMENT/
SCAN ADD
SCAN
ON/OFF
ACCESS RADIO
MENU
DECREMENT/
SCAN DELETE
MICROPHONE
JACK
MONITOR/CLEAR
TX/RX INDICATOR
Figure 1 – KME- Radio Front View
CONTROLS
All the controls for the KME- mobile radio are located on the front of
the control unit and described below:
the control unit and described below:
ON/OFF Volume Knob
This knob powers the radio ON/OFF and controls the
volume level of the received audio at the speaker. Rotate
the knob counterclockwise to turn the volume down.
Rotate the knob clockwise to turn the volume up. Rotate
the knob counterclockwise until it clicks and then stops,
to turn the radio OFF. When the knob is in the OFF
position, rotate the knob clockwise until the knob clicks
to turn the radio ON.
volume level of the received audio at the speaker. Rotate
the knob counterclockwise to turn the volume down.
Rotate the knob clockwise to turn the volume up. Rotate
the knob counterclockwise until it clicks and then stops,
to turn the radio OFF. When the knob is in the OFF
position, rotate the knob clockwise until the knob clicks
to turn the radio ON.
System/Group Channel Knob
This rotary knob is used to select the systems or
groups/channels, depending upon programming. This 16
position knob has no stop. See
groups/channels, depending upon programming. This 16
position knob has no stop. See
System/Group
Channel Selection
for more details
.