June Sing Industrial Limited ST-3760-XY Manuel D’Utilisation

 

The power supply for remote controller Functions is 12V, and their carrier frequency is 433M. 
 
There are two buttons on the controller: 
One is the Function button, which is used to switch the lighting manner of the LED lights; 
The other is the Off button, which is used to turn off the LED lights. 

 
Following are the detailed explanation on the function of Function button. 
 
Press the FUNCTION button once, the receiver is switched into FUNCTION 1;   
Press the FUNCTION button twice, the receiver is switched into FUNCTION 2;   
Press the FUNCTION button three times, the receiver is switched into FUNCTION 3;   
Press the FUNCTION button four times, the receiver is switched into FUNCTION 4;   
Press the FUNCTION button five times, the receiver is switched into FUNCTION 5, or the receiver is switch into 
FUNCTION 1 as default for model ST-815T-C. ;   
Press the FUNCTION button six times, the receiver is switched into FUNCTION 6 (for model ST-815T-A and ST-815T-B);   
Press the FUNCTION button seven times, the receiver is switched into FUNCTION 7 for model ST-815T-A, or the receiver 
is switch into FUNCTION 1 as default for model ST-815T-B. 
Press the FUNCTION button eight times, the receiver is switched into FUNCTION 8 (only applicable for model 
ST-815T-A) ;   
Press the FUNCTION button nine times, the receiver is switched into FUNCTION 1 as default (only applicable for model 
ST-815T-A). 
 
Attention:  
1.  The first press on FUNCTION button after OFF button is FUNCTION 1 default. 
2.  The first press on FUNCTION button after power connection is FUNCTION 1default. 
 
The receiver of controller is powered by 120V, 60Hz. The Zero Signal is used to sync the clock. The Synchronization 
initiates just 3 second following the FUNCTION switching.   

 

Function 1: Automatic cycling function from 2Æ3Æ4Æ5Æ6Æ7Æ8Æ2….. 
 
Function 2: Fast water flowing function. Two speeds with light /off cycle of 260ms, 530ms separately in forward and reverse 
direction. Each lighting circuit has four ranks of brightness. 
 
Function 3: Slow water flowing function. Two speeds with light /off cycle of 1s, 2s separately in forward and reverse 
direction. Each lighting circuit just has light and off ranks. 
 
Function 4: Gradually light and shade combined with water flowing function. Two speeds with light /off cycle 8s, 16s 
separately just in forward direction. Various brightness ranks smoothly switches.   
 
Function 5: Disorderly flash combined with water flowing function. Water flowing function initiates after the disorder 
flashing between two adjacent lamps. The cycling is 2.5s in forward and reverse directions. 
 
Function 6: Gradually light and shade functions in two speeds with light/off cycle of 4s and 12s separately. Various 
brightness ranks smoothly switches. 
Function 7: Water flowing function (mixing with disorder flashing), integrally displays water flowing function with cycle of 
1s in forward direction. 
 
Function 8: All lights on.