Lu Technologies LSSDA428 Manuel D’Utilisation

Page de 2
PICTURE AREA
LUTECHS.COM
London, ON, Canada
Assembled  in Canada
Please keep this manual for your records and for future reference.
Please register the product with the Serial Number below at 
www.LUTECHS.com.
The Serial Number may be used for help, search or rescue.
Name:
Birthday:
Eye Color:
Body Mark(s):
Address:
City, etc:
Phone(s):
Today:
Height:
Weight:
Asset:
SN:
Description:
Dress/Hat/Color*:
Pants/Shoes/etc*:
Today:
Height:
Weight:
Asset:
SN:
Description:
Dress/Hat/Color*:
Pants/Shoes/etc*:
Today:
Height:
Weight:
Asset:
SN:
Description:
Dress/Hat/Color*:
Pants/Shoes/etc*:
(Glue Here)
(Glue Here)
* In case of LOSS, try to remember and write down ANY information ASAP. It is VERY IMPORTANT!
Wireless Locator & Proximity Monitoring System 
with One-way Alert
PRODUCT OPERATIONS
•  The device comes with a pre-installed battery and is ready to use.
•  Whenever the battery is installed, it starts to 
work automatically.
•  MUTE ALARMS: If the device loses track of the paired device, au-
dible alarms will be triggered. In that case, if you want to mute the 
alarms, you have to press the switch 
continuously for three (3) 
seconds as shown below. 
PRODUCT INDICATORS (Figure 3)
Figure 1, insert one 
end first to install an
“AAA” battery and 
the battery cover. 
Figure 2, press the 
switch continuously 
for 3 seconds to 
mute audible alarms.
Distance:
¼ - ½
 Range*
Distance:
½ - ¾ 
Range*
Distance:
¾-
Full Range*
Distance: 
Out of Range*
2
1
3
4
5
6
Remote Battery Level 
Ɨ
Paired Device > +40°C 
+
3
on
2
on
1
on Off
* The exact range 
varies significantly
depending upon 
how complex the 
environment is. 
Metal and concrete objects in 
between 
reduce detectable 
ranges significantly.
Ranges in Open Areas*
Ranges in Rooms*
Ranges in Woods*
1
2
3
4
5
6
Distance Indicator A paired device is within ¼ - ½ of the range.*
Distance Indicator A paired device is within ½ - ¾ of the range.*
Distance Indicator A paired device is within ¾ - the full range.*
Distance Indicator A paired device is out of detectable range.*
Remote Bat. Level A paired device’s battery level by flashing.
Ɨ
“High” Heat
A paired device is exposed to > +40°C or 
Its Battery Level
Its own battery level indication by flashing.
Ɨ
Signal Reception
One flashing: one good wireless reception.
7
8
7
Its Own Battery Level 
Ɨ
!
!
!
Ɨ Battery Level Indications
•  Off: Plenty to Run.
•  1 Flashing: Medium to 
Low Level. Attention.
•  2 Fast Flashings with 
a Beep: Warning Level. 
Change battery ASAP.
(Page 1/8)
(Page 3/8)
(Page 4/8)
(Page 2/8)
AAAAAAAA
Serial Number
BATTERY INSTALLATION
•  One (1) “AAA” battery is pre-installed upon shipping.
•  AAA Lithium is recommended for low operating temperature as low 
as -40°C.
•  Open the battery cover using the mini Phillips screwdriver included 
in this package or any other appropriate tool. Keep the tiny screw in 
a safe place and do not lose it.
•  After installing a new battery, make sure to screw down the battery 
cover carefully.
 Do 
NOT use excessive force to turn the screw. It will be good 
enough as long as the battery cover does move freely.
•  Please recycle the used battery.
! Audible Alarms
8
Wireless Reception
No Indictors Anywhere
Information Area:
Please write down any information about the person or valuable 
asset to monitor, and update it frequently, for example, for a 
child once six months or more frequently if necessary.
INDUSTRY CANADA COMPLIANCE STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). 
Operation is subject to the following two conditions: (1) this device may not 
cause interference, and (2) this device must accept any interference, including 
interference that may cause undesired operation of the device. 
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils 
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit 
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en 
compromettre le fonctionnement.
The term “IC:” before the radio certification number listed below only signifies that
Industry Canada technical specifications were met.
FEDERAL COMMUNICATIONS COMMISSION 
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
Travelers: this wireless device cannot be used outside the USA 
and Canada because of different wireless regulations. Please 
visit our website to find the models that are certified to use in
both regions, for example, the USA and European Union.
READ THE ENTIRE MANUAL CAREFULLY - THIS AFFECTS 
YOUR LEGAL RIGHTS. This manual contains information on 
limitations regarding product use & function and information on 
the limitations as to liability of the manufacturer.
The wireless device can be of powerful assistance to parents  
momentarily distracted from their children but it by no means 
substitutes close parental supervision and nor does it imply 
that. LUTECHS is not responsible for lost child or asset or the 
consequence thereof.
Changes  or  modifications  not  expressly  approved  by
LUTECHS could void the user’s authority to operate the 
equipment.
All the products designed and manufactured by LUTECHS comply 
with the RoHS Directive, which prohibits Lead (Pb), Mercury (Hg), etc.
Patent Pending
System Model: 
LSS-Y2443H
Device Model(s): LSS-DA42-TX8, LSS-DA42-RX8
FCC ID: AYO-LSSDA428
IC: 10275A-LSSDA428