Motorola Solutions Inc. 89FT5875 Manuel D’Utilisation
24
DEVICE & LCD W
AKEUP
DEVICE WAKEUP
The following buttons will “wake-up” the
device:
ESC
device:
ESC
Button
Wake Up Button
Call
Call
Button
To program new messages, it is
recommended to use the
recommended to use the
button to
wake-up the CB300-D system to prevent an
outgoing broadcast over the radio system.
The CB300-D system will support up to 6
messages of 10 seconds each. The system
expects the following message order:
outgoing broadcast over the radio system.
The CB300-D system will support up to 6
messages of 10 seconds each. The system
expects the following message order:
Message 1: Local Message (Message played
back on local speaker)
Message 2: Radio Message (Broadcast when
the Call Button is pressed)
Message 3: “Low Battery” radio broadcast
message.
back on local speaker)
Message 2: Radio Message (Broadcast when
the Call Button is pressed)
Message 3: “Low Battery” radio broadcast
message.
LCD WAKEUP
The following buttons will “wake-up” the
LCD:
ESC
LCD:
ESC
Button
When the or Call Button is pressed, the
LCD is still disabled until any LCD Control
Button is pressed.
LCD is still disabled until any LCD Control
Button is pressed.