Brother Industries Ltd. 8CAE19 Manuel D’Utilisation
Troubleshooting and Routine Maintenance
147
B
Clean the outside of the machine as
follows:
follows:
B
a
Pull the paper tray (1) completely out of
the machine.
the machine.
b
Wipe the outside of the machine with a
soft cloth to remove dust.
soft cloth to remove dust.
c
Remove anything that is stuck inside the
paper tray.
paper tray.
d
Wipe the paper tray with a soft cloth to
remove dust.
remove dust.
e
Put the paper tray firmly back in the
machine.
machine.
Cleaning the scanner
B
a
Lift the document cover (1). Clean the
scanner glass (2) and the white plastic
(3) with a soft lint-free cloth moistened
with a non-flammable glass cleaner.
scanner glass (2) and the white plastic
(3) with a soft lint-free cloth moistened
with a non-flammable glass cleaner.
b
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning.
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning.
1
1
2
3
1
2