The Genie Company a Division of Overhead Door Corporation ALDPS Manuel D’Utilisation
13
1-866-599-4995
Install the DPS
(Door Position Sensor)
The DPS should be mounted on the TOP
door panel only. Mount to steel reinforced
end stile on the far left or right under the top
bracket. DO NOT mount to unreinforced door
panel.
1. Install double sided tape to back of
mounting bracket and afix to end stile.
2. Drill 1/16” pilot holes. DO NOT drill all the
way through door.
3. Use included self drilling screws to
mount DPS bracket to end stile.
4. Slide DPS down onto mounting bracket.
DPS should snap onto bracket.
END STILE