Cobra Electronics Corporation PR4700 Manuel D’Utilisation

Customer Assistance

Warranty

Introduction

Nothing comes close to a Cobra

®

c. Press the Talk button to enter the channel/privacy code in 

the selected memory location and return to 

Standby mode

on the selected memory location.

While setting a memory location, if you do not press any buttons
for 15 seconds, your radio will automatically return to 

mode on the channel/privacy code displayed before you entered
mode functions.

To recall a stored memory channel location:
1. Press the Lock/Mode button until the Memory

icon and the memory location number flash
on the display.

2. Press the Channel Up or Channel Down

button to select a memory location 
(0 through 9). 

If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.

3. Press the Talk button to return to Standby

mode on the selected memory location.

A memory location can be reprogrammed
at any time it is displayed. Press the
Hi•Low/Enter button to begin.

While recalling a stored memory location, 
if you do not press any buttons for 15 seconds,
your radio will automatically return to 

mode on the channel/privacy code displayed
before you entered mode functions.

Your microTALK

®

radio has 10 Memory Locations for storing 

your most frequently used channels and channel/privacy code
combinations. These 

Memory Locations can be selected individually

or can be scanned. (See page 19 for memory location scan.)

To program a memory location:
1. Press the Lock/Mode button until the 

Memory icon and the memory location 
flash on the display.

2. Press the Channel Up or Channel Down

button to select the memory location 
(0 through 9).

If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.

3. Press the Hi•Low/Enter button to enter 

a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.

4. Press the Channel Up or Channel Down

button to select a channel (1 through 22).

5. Press the Hi•Low/Enter button. The privacy

code numbers will flash on the display.

6. Press the Channel Up or Channel Down

button to select a privacy code (01 to 38 
if in CTCSS or 01 to 83 if in DCS).

7. Choose one of the following:

a. Press the Hi•Low/Enter button to enter the channel/privacy

code in the selected memory location and return to the
beginning of memory location options. 

b. Press the Lock/Mode button to enter the channel/privacy 

code in the selected memory location and proceed to other
functions on the channel/privacy code displayed before 
you entered mode functions.