Ricoh Company Ltd. RFTAU02 Manuel D’Utilisation
3. Other Information for This Machine
This chapter describes laws and regulations related to this machine.
Laws and Regulations
Legal Prohibition
Do not print any item for which reproduction is prohibited by law.
Printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of printing certain items,
consult with your legal advisor.
Printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of printing certain items,
consult with your legal advisor.
Laser Safety
Laser Safety for Type 1 and 3
CDRH Regulations
This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This
equipment contains four VCSELs (Vertical Cavity Surface Emitting Laser), 772–792 nanometer
wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees (maximum) in the
vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction,
and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has forty light sources and
the maximum output power of each light source is 1.23 milliwatt.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This
equipment contains four VCSELs (Vertical Cavity Surface Emitting Laser), 772–792 nanometer
wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees (maximum) in the
vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction,
and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has forty light sources and
the maximum output power of each light source is 1.23 milliwatt.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Laser Safety for Type 2 and 4
CDRH Regulations
This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This
equipment contains five VCSELs (Vertical Cavity Surface Emitting Laser), 772–792 nanometer
wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees (maximum) in the
vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction,
This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This
equipment contains five VCSELs (Vertical Cavity Surface Emitting Laser), 772–792 nanometer
wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees (maximum) in the
vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction,
29
Draft 2014/07/17