Casio Computer Co Ltd DTX5 Manuel D’Utilisation
E-61
Connecting the AC Adaptor for Cradle-type Battery Charger
Use the special AC adaptor (sold separately) for the Cradle-type Battery Charger to
connect to a wall outlet.
connect to a wall outlet.
1. After making sure that the Cradle-type
Battery Charger power switch is turned
off, plug the AC adaptor into the AC
adaptor jack on the back of the charger.
off, plug the AC adaptor into the AC
adaptor jack on the back of the charger.
2. Next, plug the AC adaptor into a power
outlet.
3. Turn on the power. This causes the
Cradle-type Battery Charger power
indicator lamp to light in red.
indicator lamp to light in red.
4. Making sure that their power contacts
come into contact with each other, place
the Handheld Terminal onto the Cradle-
type Battery Charger. This causes the
Cradle-type Battery Charger power
indicator lamp to light in green.
the Handheld Terminal onto the Cradle-
type Battery Charger. This causes the
Cradle-type Battery Charger power
indicator lamp to light in green.
When charging is initiated, Indicator 1 on
the Handheld Terminal lights up in red.
When charging has been completed,
Indicator 1 changes color from red to
green.
the Handheld Terminal lights up in red.
When charging has been completed,
Indicator 1 changes color from red to
green.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to
become connected to each other, which creates a short.
become connected to each other, which creates a short.
Shorting the power contacts can damage the Cradle-type Battery Charger.
Power switch (OFF)
POWER
Power
contacts
contacts
Power switch (ON)
Power Indicator Lamp
DT-X5_E_P59_70.p65
2004.10.1, 9:50 AM
61