Andrew Wireless Innovations Group RPT-MOR801 Manuel D’Utilisation
User’s manual for Remote Unit MOR801B Power
M0070A0A.doc
Id.-No 151155
Page 27
18-June-99
All alarms can be checked by typing the ‘STATUS HIST’ command. It is possible to cancel
minor alarms with no influence on the system by typing the ‘ALARMACKN’ command, e.g.
ALC active, VSWR or door open. The following print screen illustrates a possible ‘STATUS
HIST’ report
minor alarms with no influence on the system by typing the ‘ALARMACKN’ command, e.g.
ALC active, VSWR or door open. The following print screen illustrates a possible ‘STATUS
HIST’ report
figure 3-3 Status hist report
In case a hardware failure is detected the concerning hardware module has to be replaced. An
alarm can be acknowledged manually by software command. If all alarms have been
acknowledged the summary error LEDs are set back to green indication.
alarm can be acknowledged manually by software command. If all alarms have been
acknowledged the summary error LEDs are set back to green indication.
In case of mains power failure all data of the STATUS HIST list are lost.
The alarm can also be sent to the OMC.
The following list comprises all available alarms in the Repeater. These alarms may occur in
the STATUS HIST list.
the STATUS HIST list.