Zoom Telephonics Inc WL1046 Manuel D’Utilisation

錯誤

尚未定義樣式。

103 

receive IP information automatically. 

• 

Verify with your ISP that the DNS server 
specified for the PC is valid. Correct the 
address or configure the PC to receive this 
information automatically. 

Verify that the DNS server IP address specified on 
the PCs is correct for your ISP, as discussed in the 
item above. If you specified that the DNS server be 
assigned dynamically from a server, then verify with 
your ISP that the address configured on the 錯誤! 尚
未定義樣式。 is correct, then You can use the ping 
utility, discussed on page 104, to test connectivity 
with your ISP’s DNS server. 

If you have not changed the password from the 
default, try using “admin” as both the user ID and 
password. Otherwise, you can reset the device to the 
default configuration by pressing the Reset Default 
button on the front panel of the device (see Front 
Panel on page 14). Then, type the default User ID 
and password shown above. WARNING: Resetting 
the device removes any custom settings and returns 
all settings to their default values. 

Use the ping utility, discussed in the following 
section, to check whether your PC can communicate 
with the device’s LAN IP address (by default 
192.168.1.1). If it cannot, check the Ethernet cabling.
 

Verify that you are using Internet Explorer v4.0 or later, 
or Netscape Navigator v4.61 or later. 

Verify that the PC’s IP address is defined as being on 
the same subnet as the IP address assigned to the LAN 
port on the 

錯誤! 尚未定義樣式。

. 

Be sure to use the Confirm Changes function after any 
changes.