Mitsubishi Electric Corp HS-HD2000U Manuel D’Utilisation
37
Mitsubishi offers 6 ways to set your VCR to record upcoming broadcasts. Choose
from:
from:
D-VHS Timer Recording
Analog Timer Recording of Digital Broadcast
VCR Plus+
Analog Timer Recording of Digital Broadcast
VCR Plus+
®
system programming (easy)
On LCD reserve
Conventional VCR timer recording
Quick Program (easy) -- VCR does not need to be on to begin programming
Conventional VCR timer recording
Quick Program (easy) -- VCR does not need to be on to begin programming
You can schedule up to 8 recording events within a one month period.
Clock must be set before any timer recordings can be performed.
Clock must be set before any timer recordings can be performed.
D-VHS Timer Recording
To set the timer recording of the digital broadcast in D-VHS format, set the timer
program on the integrated HDTV or IEEE 1394-equipped HDTV receiver, not on
the VCR. Refer to your TV or receiver owner’s guide.
program on the integrated HDTV or IEEE 1394-equipped HDTV receiver, not on
the VCR. Refer to your TV or receiver owner’s guide.
1
Follow the steps 1 to 5 of Setting Up Your VCR to Playback/Recording the
Digital Broadcast in D-VHS format on page 12.
Digital Broadcast in D-VHS format on page 12.
2
Load a D-VHS tape with its erasure prevention tab intact into the VCR.
3
Make sure that the D-VHS button on the front panel is lit. If not, press this
button until it lights up.
button until it lights up.
4
Press POWER on the VCR front panel or on the remote control to turn off the
VCR.
VCR.
5
Set the timer recording on the integrated HDTV or IEEE 1394-equipped HDTV
receiver. Refer to your TV or receiver owner’s guide for this procedure.
receiver. Refer to your TV or receiver owner’s guide for this procedure.
The integrated HDTV or IEEE 1394-equipped HDTV receiver will receive the program
to be recorded on the start time you have set and send the signal for start recording to
the VCR. The VCR will start recording automatically. The integrated HDTV or IEEE
1394-equipped HDTV receiver will send the signal for stop recording to the VCR on
the end time you have set, and the VCR will stop recording automatically.
to be recorded on the start time you have set and send the signal for start recording to
the VCR. The VCR will start recording automatically. The integrated HDTV or IEEE
1394-equipped HDTV receiver will send the signal for stop recording to the VCR on
the end time you have set, and the VCR will stop recording automatically.
IMPORTANT
The recording mode will be changed automatically depending on the
broadcasting signal.
broadcasting signal.
Depending on your integrated HDTV or IEEE 1394-equipped HDTV receiver,
the programmed D-VHS recording may not be recorded if you turn on the
VCR while it is in stand-by mode for the D-VHS timer recording.
the programmed D-VHS recording may not be recorded if you turn on the
VCR while it is in stand-by mode for the D-VHS timer recording.
The programmed D-VHS timer recording may not be recorded correctly
depending on your integrated HDTV or IEEE 1394-equipped HDTV receiver.
depending on your integrated HDTV or IEEE 1394-equipped HDTV receiver.
When you connect more than one integrated HDTVs or IEEE 1394-equipped
HDTV receivers, the D-VHS timer recording of only one integrated HDTV or
IEEE 1394-equipped HDTV receiver will be activated. In this case, press
INPUT on the VCR remote to set the VCR’s input to tuner or press IEEE
1394 INPUT to select d1 to d5 which corresponds to the receiver or TV you
would like to record.
HDTV receivers, the D-VHS timer recording of only one integrated HDTV or
IEEE 1394-equipped HDTV receiver will be activated. In this case, press
INPUT on the VCR remote to set the VCR’s input to tuner or press IEEE
1394 INPUT to select d1 to d5 which corresponds to the receiver or TV you
would like to record.
Timer Recording