Mitsubishi Electric Corp HS-HD2000U Manuel D’Utilisation

44

You cannot transfer the PlusCode number while the VCR is recording or on
recording pause mode.

If the VCR memory is full, Program memory is full will appear for 8 seconds,
and then the Recap screen will appear.  Use CANCEL to erase an entry
before you can add another one.

If the code number you entered is wrong, PlusCode Not a valid number will
display on the screen for 8 seconds, and then the VCR Plus+ Program to
record menu will reappear.

If two programmed recording times overlap, VCR is already programmed for
that time will display on the screen.  You will need to erase the previous
program before you can enter the new one.

If the remote control is failed to transfer, The transfer is failed please transmit
again will be displayed on the screen for 8 seconds.

The VCR will be turned off automatically about 16 seconds after the Recap
screen appears on screen.

To program additional recording times, follow the procedure from step 2 to 8
again.

10 When you are finished with all programming, check the following:

• If you have a cable box, a digital cable box, a PRIMESTAR

®

 or a DISH

Network

™

 satellite receiver, leave the cable box or receiver turned ON.

• If your VCR does not control your cable box, leave the box tuned to the

station you wish to record.

• Turn the VCR power OFF and make sure the programmed recording light is

lit.

To cancel VCR Plus+

®

 System Programming while programming with the

remote control display, press PlusCode.

To cancel VCR Plus+

®

 System Programming while displaying the Recap

screen, press CANCEL to cancel the selected program, and then press
MENU to exit the Recap screen.