Mitsubishi Electric Corp HS-HD2000U Manuel D’Utilisation

58

Counter zero stop allows you to quickly access the beginning of a recorded or
playback section of a tape.  The counter zero stop will automatically fast forward or
rewind the tape to “0H00M00S” and stop.

Press CANCEL on the remote control at the point you wish to locate later.  The
counter will reset to “0H00M00S”.

When you wish to return to the point specified in step 1, press VIDEO on the
remote control.  The video function menu appears on your screen.  Press
VIDEO until the Counter zero stop function appears.

Turn the SHUTTLE ring to the right to start the counter zero stop.

The VCR will automatically search to the counter “0H00M00S” and then stop.  The
VCR may stop slightly before or after the counter “0H00M00S”.

Index search is a way to find specific points on a tape.  Before using index search,
index marks are placed at important places on a tape.  Index search is used to find
these marks.  Index marks are added automatically whenever your VCR starts a
new recording; you can also add index marks manually at any point during record-
ing.

Whenever recording is begun from the STOP mode, an index mark is automatically
added to the tape.  When analog recording, a message will indicate that the mark
is being recorded.

Index marks are not added when you press PAUSE or REC to begin recording from
the record-pause mode.

To add an index mark yourself, press REC on the remote control while a tape is
recording.

Index marks must be added at least one minute apart.

When the tape is stopped, press INDEX 

^

 to begin a forward search; press

INDEX 

\

 to search in reverse.  The VCR will fast forward or rewind and

index search display appears on the TV.

Once the VCR finds an index mark, it will begin playing back the tape from that
point.

You can press INDEX 

^

 or INDEX 

\

 up to 19 times to search for that

many index marks.  For example, to find the third index mark ahead, press
INDEX 

^

 three times.  The on-screen display will count down the number of

marks passed before playback begins.

To cancel index search, press STOP.

Index search may not work correctly if the interval between two index mark is
shorter than 5 minutes in HS mode, 10 minutes in STD mode, 5 minutes in
SP mode or 15 minutes in EP mode.

VCR Looking

for index+ 1

⁄‡‚‡‡‡‡‡‡‹

 REM  1:40

  0h20m08s

VCR

Counter zero stop

Use ENTER to start

(This screen appears during
analog playback only.)