Shenzhen Chengshi Technology Co. Ltd. M1 Manuel D’Utilisation
Your headset has two lights to indicate the state of charge. When the red light flashes, you will also
get a voice prompt in the earphone to tell you to charge the unit.
get a voice prompt in the earphone to tell you to charge the unit.
1. Connect the charger to the USB port on the headset
2. Connect the charger to an electric power outlet
3. The red light will remain constant while the unit is charging
4. Once the charging is complete, the red light turns to blue
2. Connect the charger to an electric power outlet
3. The red light will remain constant while the unit is charging
4. Once the charging is complete, the red light turns to blue
Charging takes between 1 and 2 hours and the headset performs best when fully charged
Volume buttons
To prevent possible damage to the ears, pressing the volume + or volume – button increases or
decreases the earphone volume one step at a time.
Pairing your Bluetooth
®
headset with a cell phone
1. With the headset turned off, press and hold the MFB key until the red and blue lights flash
alternately (takes about 6 seconds). You will also get a voice message, “Pairing state” in the
earphone. This state allows the headset to be paired to another Bluetooth
earphone. This state allows the headset to be paired to another Bluetooth
®
device.
2. Turn on the cell phone and select the Bluetooth
®
option.
3. When the headset model name appears on the cell phone screen, tap to accept.
4. If a password is requested, use „0000‟.
5. When pairing has been successful, the headset will flash a blue light.
4. If a password is requested, use „0000‟.
5. When pairing has been successful, the headset will flash a blue light.
Note
If no connection is established within 2 minutes, the unit will switch off.
Pairing to a second cell phone
1. Follow the above steps to pair to cell phone #1.
2. Turn off the Bluetooth
2. Turn off the Bluetooth
®
option on cell phone #1
3. Press and hold the MFB key on the headset until the red light flashes and the headset turns off
4. Repeat the pairing process as above, but this time using cell phone #2
5. Once the second pairing has been successful, turn cell phone #1 on again
6. Select the Bluetooth
4. Repeat the pairing process as above, but this time using cell phone #2
5. Once the second pairing has been successful, turn cell phone #1 on again
6. Select the Bluetooth
®
option, and find and select the headset model number.
7. Tap to confirm.
Both cell phones are now paired to the headset.
Notes
Pairing will only work properly when earphone and cell phone are within 10 meters of
each other. Beyond this distance, sound quality will be reduced or the pairing may not
operate.
operate.
Large objects blocking the direct line between units, may cause pairing fail.
The earphone will automatically attempt to pair with the cell phone following a
temporary disconnection.
The connection may also be re-established by pressing the MFB key once, or through
the cell phone‟s Bluetooth
®
option.
Connecting your headset to a computer