Hyundai J-Comm.Co.Ltd HDJC-1701 Manuel D’Utilisation
distance.
Once entered into this menu, point on the map pressed then hold 1 second become entered as a
reference point. (Refer to third picture from left to right in above picture).
Once reference point entered, type distance and bearing then click “Calc” button to display location
with acquired coordinate.
E.
Once entered into this menu, point on the map pressed then hold 1 second become entered as a
reference point. (Refer to third picture from left to right in above picture).
Once reference point entered, type distance and bearing then click “Calc” button to display location
with acquired coordinate.
E.
Reference point
Touch then press specific point on map screen around 1 second displays shortcut menu (refer to left
picture below)
picture below)
Figure 5-14 Set reference point
Choose point as above then click “Pointing” button creates reference point on the map and store it.
These created reference point and my position displayed on the map by click target shaped button in
3 of main menu by turns.
F.
These created reference point and my position displayed on the map by click target shaped button in
3 of main menu by turns.
F.
Hand sketch mode
mBFT17 provide hand sketch mode on the map and entered into this menu by pressing one point on
the map then hold 1 second then choose “add sketch” among popup menu.
Figure 5-15 Hand sketch 1
Figure 5-15 Hand sketch1 shows how to add path on the map.
Click “add sketch” popup menu to use type of sketch in ① of Figure 5-15 Hand sketch 1.
①
②
③
④
⑤