IFI H.K. Limited AJM3 Manuel D’Utilisation
2.1-FRONT
BLUETOOTH PAIRING
The speaker will automatically enter pairing mode once powered on or it will auto
pair with the last paired device. To restart the connection, disconnect by short
pressing the bluetooth button.
pair with the last paired device. To restart the connection, disconnect by short
pressing the bluetooth button.
The speaker will power off automically after 10 minutes of inactivity.
CONNECTIONS
AJM-3
( 1 sec.)
IMPORTANT
The speaker should be fully charged before use.
White LED indication will turn off once speaker
is fully charged.
White LED indication will turn off once speaker
is fully charged.
CONTROL BUTTONS
1x
1x
1x
1x
1x
1x
AJM-3
Inflatable
Raft
USB
Charging
Cable
D-Ring
AUX-IN
Cable
Hand Strap
Power
Bluetooth/Connections
Play/Pause/Calls
Vol. down/Track back
Vol. up/Track forward
Microphone
LED Indication
WHAT’S IN THE BOX
( 1 sec.)
( 1 sec.)
( 2 sec.)
( 2 sec.)
Hand Strap
MOUNTING SCREW-IN PORTS
Inflatable Raft
To ensure the speaker is waterproof, please remove all connection cables from
the charging and AUX-IN port before putting it into water, close the protective
cap tightly. Failing to do so may result in permanent damage to the speaker.
the charging and AUX-IN port before putting it into water, close the protective
cap tightly. Failing to do so may result in permanent damage to the speaker.
CAUTION!
To answer incoming calls in this mode, the primary unit will be the
speakerphone.
speakerphone.
When two speakers are paired, long press both volumn down and the volumn up
buttons until you hear the sound prompt.
buttons until you hear the sound prompt.
SWITCH BETWEEN STEREO AND MONO MODE
DISTANCE LIMITATION UNDER
- TRUEWIRELESS CONNECTION
UP TO 35M
UP TO 15M
Stereo mode
Secondary Unit
Primary Unit
This action will not change the status of the primary unit, the primary
unit you used to paired with bluetooth device will remain the same.
unit you used to paired with bluetooth device will remain the same.
( 2 sec.)
= Left Channel
= Right Channel
= Mono Mode
(Equal output on both speakers)
( 5 sec.)
TRUEWIRELESS CONNECTION
- PAIR 2 SPEAKERS TO ONE DEVICE
In order to enter truewireless connection, both speakers need to be connected
first. Power on both speakers, then long press the bluetooth connection button
on one of the speakers, a sound prompt “beep” will indicate it is in truewireless
searching mode.
first. Power on both speakers, then long press the bluetooth connection button
on one of the speakers, a sound prompt “beep” will indicate it is in truewireless
searching mode.
Once the connection is completed, the left channel will “beep” once and right
channel will “beep” twice, the LED on the primary unit will blink while it is in
searching mode for a bluetooth device. Then proceed to pair as normal.
The two speakers that have been paired in truewireless mode previously will
connect automatically once powered on.
channel will “beep” twice, the LED on the primary unit will blink while it is in
searching mode for a bluetooth device. Then proceed to pair as normal.
The two speakers that have been paired in truewireless mode previously will
connect automatically once powered on.
To disconnect the truewireless connection, short press the bluetooth connection
button on the secondary unit to return to mono mode with single unit, or short
press the same button on the primary unit to disconnect with bluetooth device.
button on the secondary unit to return to mono mode with single unit, or short
press the same button on the primary unit to disconnect with bluetooth device.
( 2 sec.)
= Right Channel
= Left Channel
The speaker which you long pressed the bluetooth button to
initiate the truewireless connection will be the primary unit.
initiate the truewireless connection will be the primary unit.
To reset the list of memorized bluetooth devices in the unit, long press the
play or pause button and the bluetooth connection button for 5 seconds.
play or pause button and the bluetooth connection button for 5 seconds.
INSTRUCTION MANUAL
GUIDE D UTILISATION
GUIDE D UTILISATION
ENG & FRA
Information contained herein is subject to change without notice.
L'information fournie peut etre soumise a des modifications sans preavis.
L'information fournie peut etre soumise a des modifications sans preavis.
IMPORTANT!
IMPORTANTE!
IMPORTANTE!
This product is waterproof only if the instructions are followed.
Avoid submerging the product below 1m and always ensure that
the charging cap is secured tightly before use.To ensure the best
audio quality the speaker should be fully charged before use.
Avoid submerging the product below 1m and always ensure that
the charging cap is secured tightly before use.To ensure the best
audio quality the speaker should be fully charged before use.
Ce produit n’est etanche que si les instructions sont suivies.
Evitez de submerger le produit a plus dun metre et assurez
vous toujours que la capsule de charge est bien en place et
serree avant usage. Afin d’obtenir la meilleure qualite audio le
haut parleur devra etre completement charge avant usage.
Evitez de submerger le produit a plus dun metre et assurez
vous toujours que la capsule de charge est bien en place et
serree avant usage. Afin d’obtenir la meilleure qualite audio le
haut parleur devra etre completement charge avant usage.
To answer incoming calls, short press the play or pause button, and long press
the same button to reject calls.
the same button to reject calls.
ANSWERING CALLS
( 1 sec.)
( 2 sec.)
In order to activate Siri® while the speaker is paired with an Apple device,
long press the play or pause button. Short press to deactivate.
long press the play or pause button. Short press to deactivate.
( 2 sec.)
Siri® ACTIVATION
In truewireless mode, use the speaker you used to connect
with your bluetooth device to activate Siri®.
with your bluetooth device to activate Siri®.