TEKTELIC Communications T0004280 Manuel D’Utilisation
User Manual
T0004280_UM
Version 1.4
TEKTELIC Communications Inc.
Confidential
Page 3 of 8
What’s In The Box
Tektelic Pico Gateway (see table below for breakdown of available configurations)
AC Power Adapter
3-foot Ethernet Cable
External Antenna
Part Number
ISM Band
Antenna Type
WiFi Enabled
T0004313
902-928 MHz
External
Yes
T0004471
902-928 MHz
External
No
Specifications
AC power adapter
o 120V AC, 60Hz, 0.4A input, 5V DC, 2A output
Operating temperature: 0 to 40°C
Indoor use only, do not connect to outdoor antennas or outdoor network cables
System Requirements
Requires internet access via an RJ45 cable connection or Wi-Fi connectivity (802.11 b/g/n at 2.4 GHz)
Requires continuous access to a standard 120V, 60Hz AC power outlet
Connecting and Configuring your Gateway
Connect the provided power adapter and, when applicable, the external antenna to the gateway
1
The gateway starts up as soon as power is applied, expect to see a solid green LED on the back RJ45
right LED
right LED
If you choose to access the internet via an RJ45 cable connection:
Connect the Ethernet cable from your Gateway to a LAN port on your router
o The Gateway is configured for DHCP, you should see activity indicated on the left RJ45 LED
after a few moments
The Gateway is ready for use
If you choose to access the internet via a Wi-Fi connection:
Use a Wi-Fi client (eg. smart phone) and connect to the KonaPicoAP_#SN access point within the first
minute of powering up the gateway (while the Wi-Fi LED is blinking)
minute of powering up the gateway (while the Wi-Fi LED is blinking)
Browse to http://192.168.10.1 to view a webpage allowing connection to your Wi-Fi network
Select your SSID and enter your passphrase, allowing your gateway to connect to your network as a
client
client
1
Use the gateway only with the provided power supply and Antenna