TEKTELIC Communications T0004437 Manuel D’Utilisation
Pearl Gateway User Manual
T0004906
Version 1.4
TEKTELIC Communications Inc.
Confidential
Page 26 of 52
DC power is supplied to the TTU Module through the RF cable connection to the Fixed Gateway.
2.8 RF Cable Installation
The Gateway installation will require connection to a GPS antenna and an ISM RF antenna.
Antenna gain and type must respect the equipment specification. For the case of the fixed
gateway, transmit power configuration is not a function of antenna type. The system maximum
transmit power is configured assuming an antenna with the highest specified gain (8dBi) is
used. If the 6dBi antenna is used, the radiated power is 2dB less. The RF connector interface
to a cable is not generally water proof and must be taped to be used outdoors. TEKTELIC
recommends taping with Scotch Wireless Weatherproofing Kit, WK-101. Follow the taping
procedures outlined by the supplier of this tape system.
Antenna gain and type must respect the equipment specification. For the case of the fixed
gateway, transmit power configuration is not a function of antenna type. The system maximum
transmit power is configured assuming an antenna with the highest specified gain (8dBi) is
used. If the 6dBi antenna is used, the radiated power is 2dB less. The RF connector interface
to a cable is not generally water proof and must be taped to be used outdoors. TEKTELIC
recommends taping with Scotch Wireless Weatherproofing Kit, WK-101. Follow the taping
procedures outlined by the supplier of this tape system.