Specim Spectral Imaging Ltd. WL18SBMOD Manuel D’Utilisation

 | Specim IQ User Manual | 

5. Switch the charger to 1000 mA charging current by pressing the charger button.
6. Recharging starts automatically.

At room temperature (23°C / 73°F), it takes approximately two hours to fully recharge a completely exhausted

battery. The time required to recharge the battery depends on the ambient temperature and charge level of the

battery.

7. After recharging, detach the cable from the main socket.

This section describes the icons on the viewfinder.
The viewfinder icons are:

Description
GPS is on, and it has found a satellite.

GPS is on, but it has not found a satellite yet. The image blinks.

GPS is off.

This animation indicates that the device is saving data onto the memory card.

The number next to the SD card icon indicates the number of images you can take, until the

memory card is full.

This icon indicates the device battery level. In the figure, the battery level is 70%.

This section contains tips on using memory cards with Specim IQ.
Use SDHC memory cards of class10, 40 MB/s, or better.
Do not remove the memory card from the device while recording data. If you do, the screen below is opened, and you

must power OFF and power ON the device, before recording data.