Specim Spectral Imaging Ltd. WL18SBMOD Manuel D’Utilisation
| Specim IQ User Manual |
43
Figure 64: Attaching the USB Cable
8. Import the files to Specim IQ Studio.
See
Importing Data from Specim IQ
.
Using Time Lapse
This section describes how to use the time lapse function on Specim IQ.
When defining the time lapse period, pay attention to the fact that a time lapse period shorter than 10 minutes may be
When defining the time lapse period, pay attention to the fact that a time lapse period shorter than 10 minutes may be
too short for long integration times. If the set interval is passed, before the current data cube has been recorded, the
recording of the next data cube will start immediately after the previous one.
Important:
If you use a long time lapse period, it may be necessary to feed power to the camera. For this, you will need a
If you use a long time lapse period, it may be necessary to feed power to the camera. For this, you will need a
3 A charger and a cable capable of transferring 3 A, which are not included in the sales box.
Proceed as follows:
1. Press the Custom 3 button.
2. Select the white reference method for the time lapse scans.
1. Press the Custom 3 button.
2. Select the white reference method for the time lapse scans.
Figure 65: Selecting the White Reference Method for Time Lapse Scans
The options are:
•
•
Custom — Select a custom white reference.