Wave WiFi Inc. WWR Manuel D’Utilisation

 

with

 

subsequent scans, the bottom of the list may   

change frequently due to the signal strength of 
the weaker access points. 
To connect to a HotSpot, click on the HotSpot 
name (SSID). The Rogue will then attempt to 
negotiate a connection with the remote HotSpot. 
During this process the screen will show “connect-
ing”. Do not click on anything until this process is 
completed. When the HotSpot is able to provide 
an IP address to the EC unit, the red “NO” for the IP 
address will change to a green “YES”.  

Connect the Rogue’s POE adapter
to your computer’s Ethernet port. After several 
seconds your computer should receive an IP 
address from the Rogue (a Windows computer will 
generally show the message icon “Connected” at 
the botto m of the screen).
Open your browser and type: 
IP address: 192.168.89.1 into the address bar 
and press “enter”. The Network Scan page will then 
open. 

If necessary you can refresh the network list by 
clicking the “Scan” button. 
The list of wireless networks (HotSpots) is ordered 
by signal strength: the strongest signals are 
indicated by the color 

. It is likely that 

If the HotSpot to which you are connected 
has Internet access, then “YES” will appear on 
the Internet line.

Clicking on the “Settings” tab opens the 
above page. “Disabling EC Firewall” removes 
your protection from access by other 
network users. However, it may be necessary 
to disable this feature to access some 
HotSpots.
Clicking “reboot” disconnects the Rogue from 
the current hotspot and also refreshes the 
connection. You may have to reconnect after 
a reboot if the hotspot is not a favorited 
network.    

Rogue Quick Start Guide 

  Is the cable run of the Rogue more than 60ft?
  Are you using a coupler?
  Are you using the 12v power adapter provided? 
  The first step in troubleshooting should be to power cycle the unit. 
Meaning to power it off and back on. This should last 
30 secs and should be the Rogue as well as the router it is connected to.
  Check the lights on the POE injector. They should show solid green. If 
the POE lights are blinking call Wave-WiFi (954-928-1310). 
If only the  “DC”  light is on then the Rogue is not receiving power. Check 
all cable connections ensuring they are all snug and not loose or falling 
out. (If the ethernet cable is sliding out of the Rogue unit then check that 
the ethernet port tabs are not damaged). 

 

-How to log into splash pages / log in pages

1.) You would need to connect to the marina or grounds WiFi connection 
directly not using the rogue and bring up the splash page/Login page.
2.) Fill out the splash page but DO NOT SUBMIT
3.) Open a second tab on the browser.
4.) Disconnect from the WiFi connection and connect to the Rogue unit.
5.) Through the Rogue interface click the WiFi source that you are trying 
to connect to AT THE SAME TIME switch back to the splash page and 
submit the login information.

This will make it so that the Rogue is submitting the log in information 
and should allow you access onto the network. If not please call Wave 
WiFi for further instructions.  

Favoriting Hotspots

1.) Connect to the network that you want to favorite.
2.) Once connected click the yellow star
3.) To the right click “Add current network to favorites.
4.) Click the ”network scan” tab and you should see
      the         icon next to the network you favorited. 
       

AVE

WiFi

On the Water and Online

.