Landauer Inc. V0100 Manuel D’Utilisation
Page
1
Verifii
™
Dosimeter User Guide
Thank you for choosing the Verifii
TM
Digital Dosimetry Platform to manage your occupational radiation
monitoring programs. The following instructions have been prepared to help you achieve optimal results
when using the Verifii digital dosimeter.
when using the Verifii digital dosimeter.
Dosimeter Communications
The Verifii digital dosimeter communicates with the Verifii cloud applications via a base
station/gateway using Bluetooth Low Energy (BLE) 4.0 communications. The BLE signal typically has a
range of 50 feet and the dosimeter should be placed within 50 feet of the base station at least once daily
for data transmission.
station/gateway using Bluetooth Low Energy (BLE) 4.0 communications. The BLE signal typically has a
range of 50 feet and the dosimeter should be placed within 50 feet of the base station at least once daily
for data transmission.
The Verifii Digital Dosimetry Platform supports a number of devices to be used as a base station
including iPads, iPhones and PC’s. For information about assigning dosimeters to participants and
establishing the Verifii dosimeter’s communications with a base station, please see the “Quick Start Base
Station User Guide.”
including iPads, iPhones and PC’s. For information about assigning dosimeters to participants and
establishing the Verifii dosimeter’s communications with a base station, please see the “Quick Start Base
Station User Guide.”
The Verifii Digital Dosimeter needs to be within range of a base station to support the following
dosimeter modes of operation:
dosimeter modes of operation:
‐
Initialization
‐
Assignment
‐
Unassignment
‐
Data Transmission
‐
Software/Firmware Updates
Initializing the Device
When you receive your dosimeter in the box, it will be in sleep mode. This keeps the device in ultra‐low‐
power mode to optimize shelf life. When you are ready to use the device, you will need to initialize it by
pressing the wake up button. The dosimeter LED will flash three times indicating the dosimeter has been
successfully activated
power mode to optimize shelf life. When you are ready to use the device, you will need to initialize it by
pressing the wake up button. The dosimeter LED will flash three times indicating the dosimeter has been
successfully activated
Using the Device
Once the device is initialized and assigned to a participant, it will collect measurements every hour.
There is nothing additional you will need to do to use the device. Simply ensure you are within range of
a base station (50 feet) at least once per day and wear the dosimeter properly.
There is nothing additional you will need to do to use the device. Simply ensure you are within range of
a base station (50 feet) at least once per day and wear the dosimeter properly.
While wearing the dosimeter:
1. Your badge should be worn on or near your shirt collar
2. The raised hexagon shape on the dosimeter must be facing out and away from the body
3. Always check the dosimeter label to ensure you’re wearing the correct dosimeter
2. The raised hexagon shape on the dosimeter must be facing out and away from the body
3. Always check the dosimeter label to ensure you’re wearing the correct dosimeter
Note: Your dosimeter may generate an error message on the Verifii dashboard if it has been away from
the base station for too long, or if the batteries need to be replaced. In these instances, follow the
the base station for too long, or if the batteries need to be replaced. In these instances, follow the