Viaan Electronics VELORA102 Manuel D’Utilisation
The transmitter module may not be co-located with any other transmitter or antenna.
The module shall be only used with the external antenna(s) that has been originally
tested and certified with this module.
The module shall be only used with the external antenna(s) that has been originally
tested and certified with this module.
As long as the conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.).
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.).
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization for
this module in combination with the host equipment is no longer considered valid and
the FCC ID of the module cannot be used on the final product. In these circumstances,
the OEM integrator will be responsible for re-evaluating the end product (including the
transmitter) and obtaining a separate FCC authorization.
configurations or co-location with another transmitter), then the FCC authorization for
this module in combination with the host equipment is no longer considered valid and
the FCC ID of the module cannot be used on the final product. In these circumstances,
the OEM integrator will be responsible for re-evaluating the end product (including the
transmitter) and obtaining a separate FCC authorization.
End product labeling:
The final end product must be labeled in a visible area with the following: “Contains
Transmitter Module FCC ID: 2ALON-VELORA102
Transmitter Module FCC ID: 2ALON-VELORA102
This device must be kept away from all persons by 20cm or more and installations
using less distance, or installations using antennas with gain greater than that with
which this was Certified will require additional approvals.
using less distance, or installations using antennas with gain greater than that with
which this was Certified will require additional approvals.
Antenna Specification:
Type: Ceramic Antenna
Model: VELORA102
Brand: Wireless
Gain: 2dBi
Type: Ceramic Antenna
Model: VELORA102
Brand: Wireless
Gain: 2dBi