NEOCONTROL US LLC NMI01WT Manuel D’Utilisation
Slim touch es funciona con 2 pilas CR2032.
Para insertar la batería siga los siguientes pasos:
• Primero, retire la tapa.
• Inserte la batería en la esquina inferior derecha en su
Para insertar la batería siga los siguientes pasos:
• Primero, retire la tapa.
• Inserte la batería en la esquina inferior derecha en su
lugar respectivo.
• A continuación, coloque la tapa.
CAMBIO DE BATERÍAS
Home automation
Automatización residencial
Automação residencial
Neocontrol US LLC
Neocontrol US LLC
www.neocontrolglobal.com
For more information visit
:
GATILLO DE COMANDOS (ESCENAS)
INFORMACIONES TÉCNICAS
• Fuente de alimentación: 2 batería de 3V (CR2032)
• Frecuencia RTN: 434MHz (TX)
• Bajo consumo de batería
• Rango de Señal RF: 25m
• Temperatura de almazenaje: 0°C a +50°C
• Temperatura de funcionamiento: -10°C a + 70°C
• Humedad: 95% + 5% no condensada
• Máxima potencia de la señal de RF: 10 mW
• Dimensiones: 88mmx127mmx15mm
• Peso: 132g
• Frecuencia RTN: 434MHz (TX)
• Bajo consumo de batería
• Rango de Señal RF: 25m
• Temperatura de almazenaje: 0°C a +50°C
• Temperatura de funcionamiento: -10°C a + 70°C
• Humedad: 95% + 5% no condensada
• Máxima potencia de la señal de RF: 10 mW
• Dimensiones: 88mmx127mmx15mm
• Peso: 132g
Note: The grantee is not responsible for any changes
or modifications not expressly approved by the party
responsible for compliance. such modifications could
void the user's authority to operate the equipment.
or modifications not expressly approved by the party
responsible for compliance. such modifications could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.