SHENZHEN GOODHEALTH MOTOR MANUF. CO. LTD. HK-S-33 Manuel D’Utilisation
二、
Operation introduction
1.
Put the battery into controller。(Preparatory work: connect all actuators based on the spec then
apply power.)
apply power.)
2.
Press
button , all vibrations will start, by default automatically close after 15
minutes .。
3.
Press
button, control head vibration on or off.
4.
Press
button, control foot vibration on or off.
5.
Press
button, head and foot lift up together, head is up to 60 degree, foot is up to 20
degree。
6.
Press
button, head and foot lift up together, head is up to 10 degree, foot is up to 30
degree。
7.
Press
button, adjust the vibration intensity (three grades: strong / middle / weak)。
8.
Press
button, head and foot lift up to 15 degree.
9.
Press
button,
head and foot lower down automatically, then bed gets flat.
10.
Press
up or down button, head lift up or lower down.
11.
Press
up or down button, foot lift up or lower down.
三、
Technology parameters
1.
Controller：
Input
DC4.5V;
Rated current：25mA.
2.
Power supply：
Input AC100-240V; Output DC29V ; Rated Current：2A.
四、
2.4G Wireless Remote Controller connect with Control box.