SHENZHEN GOODHEALTH MOTOR MANUF. CO. LTD. HK-S-70 Manuel D’Utilisation
3.
Long press
button
，Head position goes down.
4.
Long press
button, foot position rises up.
5.
Long press
button，foot position goes down.
6.
Long press
button, both head position and foot position rise up together.
7.
Long press
button, both head position and foot position go down together
.
8.
Press
button, (combination key)，both head position and foot position go down then bed gets flat
position.
9. Press
button, (memory key), both head position and foot position rise to 15
°(default）。
三、
Technology parameters
1.
Controller：Input DC4.5V, Rated current：20mA
2.
Power supply
: Input AC100-240V, output：DC29V,
Rated current： 2A
四、
2.4G Wireless remote controller connect with Control box
Step 1：
Electrify the control box then hear a
”Click”（Preparatory work: connect all actuators based
on the spec then apply power.)
Step 2：
Take the controller close to the scan code area of control box, after hear a
“click” then
controller connects with control box successfully.
Remark:
If the controller is missed, please press the button
“one-key flat” to reset to flat position. And please
get a new one and repeat the steps 1~2。