TempSen Electronics Company TEMPOD20B Manuel D’Utilisation
USER MANUAL
UM-PDUB-160217 REV.D
Page 13 / 42
Start Recording
Manual Start & Stop
Press and hold Start/Stop button for
3
seconds to manually activate data logger and start recording, if logger was set to start option of Start
Delay, then recording would only begin after Start Delay time passes.
“go” flashes on LCD reminding you to keep current button action.
“REC” appears on down left corner of LCD indicating recording already begins.
Manual Start with Start Delay
Start delay time and a Clock appear on LCD and logger begins countdown after logger was manually
activated, recording begins after start delay time passed.
Manual Start with Temperature Conditions
Logger begins to measure temperature and returns readings to LCD after logger was manually activated,
recording begins when temperature meets pre-set temperature condition(s).
You could also start data logger to record using TempSen Go APP and Smart Device, see
Auto Start
If logger was set to Start Mode > Auto Start, then logger would start recording automatically on pre-set date & time.