TempSen Electronics Company TEMPOD20B Manuel D’Utilisation
USER MANUAL
UM-PDUB-160217 REV.D
Page 9 / 42
Configure Tempod
Configure Tempod with TempSen Go APP
See
, please make sure Bluetooth function on Tempod data logger is turned on before
configuration.
Configure Tempod with TempCentre Software
Connect Tempod data logger to USB port of PC, open TempCentre software, select Configure Device in tool bar, software would
automatically start searching and connecting devices, then user could start programming of this data logger.
See TempCentre Data Management Software about download, installation and operartion of TempCentre software.
Configure Tempod with Online Utility
Connect ITAG4 logger to USB port of PC, open Internet Browser, go to
, the online utility of Tempod data logger, input
and select configuration parameters you need, then download the configuration profile (.cfg format file), save it into the logger created
removable storage device “TempSenDisk”, configuration is done.
LCD displays “USB” when logger connected to PC.
LCD displays “ConF” for configuration success when connection with PC remains. (Only applicable to non-
software configuration).
IMPORTANT
Please only apply configuration profile to the same product model on which configuration file is created
based.
Do not alter the configuration profile downloaded to avoid configuration error.
Configuration profile contains time zone information, so please do not use this file in areas of different time
zones, or it will result in incorrect time base.
Configuration to data logger would erase all data recorded, so please make sure you have save the data before
configuration.
Do not remove data logger from PC before you are prompted of configuration success.