Berlin Brands Group Inc. CON150US Manuel D’Utilisation
27
EN
Alarm does not work.
- Switch on the alarm.
- Due to the volume setting, refer to the solutions
of „No sound“.
- The source of alarm was set to be station but there is
no network connection.
Change the source of alarm or reconfigure the
connection.
- Due to the volume setting, refer to the solutions
of „No sound“.
- The source of alarm was set to be station but there is
no network connection.
Change the source of alarm or reconfigure the
connection.
USB driver or MP3 player
is not detected.
is not detected.
- Check if the USB driver or MP3 player is
plugged properly.
- Some USB hard disks need external power
supply, make sure it is
connected to the power.
- Not all MP3 players can be read directly on the
device — use an USB
drive instead.
plugged properly.
- Some USB hard disks need external power
supply, make sure it is
connected to the power.
- Not all MP3 players can be read directly on the
device — use an USB
drive instead.
NetRemote does not show or
connect to CONNECT-150
connect to CONNECT-150
- Reopen the App.
- If you have several streaming from several devices at
the same time, it
may cause crash, reboot CONNECT-150 and/or your
device.
- If you have several streaming from several devices at
the same time, it
may cause crash, reboot CONNECT-150 and/or your
device.
All other undetermined
cases.
cases.
- CONNECT-150 may process large amount of data
after a period of operation,
no matter in which mode, it will cause the system
freeze or malfunction.
Reboot CONNECT-150 if necessary.
- The normal function of the product may be disturbed
by strong Electro-
Magnetic Interference. If so, simply reset the product
to resume normal
operation by following the instruction manual. In
case the function could not
resume, please use the product in other location.
- The device may malfunction when used in areas with
strong radio interfe-
rence. The device will work properly again once there
is no more interfe
rence.
after a period of operation,
no matter in which mode, it will cause the system
freeze or malfunction.
Reboot CONNECT-150 if necessary.
- The normal function of the product may be disturbed
by strong Electro-
Magnetic Interference. If so, simply reset the product
to resume normal
operation by following the instruction manual. In
case the function could not
resume, please use the product in other location.
- The device may malfunction when used in areas with
strong radio interfe-
rence. The device will work properly again once there
is no more interfe
rence.