ShenZhen Shenglan Electronic Industrial CO. LTD X8 Manuel D’Utilisation
X8英文说明书(FCC) 展开尺寸:248*140mm 折后尺寸:62*70mm 工艺材质:双面彩色印刷 (线框不印) 风琴折+对折 105g铜版纸
正面
反面
English
Product functions
Magnet switch
LED light of
charging box
Display switch
of electric
quantity in
charging box
Headset
charging port "L"
Charging box
charging interface
Multifunction
button (MFB)
of headset
Headset LED light
micro hole
User Instructions
X8
TWS Wireless Bluetooth Headset
Notes: In the second usage (in case of failing to delete such equipment
name in the mobile phone bluetooth list):
(1) Only need to put the headset in the charging box, then repeat the
operation " " to return to the last status of mobile phone.
(2) When the headset isn't in the charging box, it is necessary to keep
long press of the MFB key of left and right headset for 3 seconds in
the meantime. After the headset achieves the mutual matching,
automatically return to the last status of mobile phone.
name in the mobile phone bluetooth list):
(1) Only need to put the headset in the charging box, then repeat the
operation " " to return to the last status of mobile phone.
(2) When the headset isn't in the charging box, it is necessary to keep
long press of the MFB key of left and right headset for 3 seconds in
the meantime. After the headset achieves the mutual matching,
automatically return to the last status of mobile phone.
Note: When the headset cannot enter the phone pairing state described
in step , manual pairing is required.
The following steps shall be implemented:
1):Keep long press of the MFB key of left and right headset for 3
seconds respectively at first, then power off the left and right
headset. In the meantime, the red LED blinks for one time,
representing the headset has been powered off.
2):Then keep long press of the MFB key of left and right headset for 5
seconds in the meantime till the red and blue lights of left and right
headset blinks alternately. Get close to the left and right headset, at
this time, the left and right headset will automatically complete the
connection. The red and blue LED light of right headset is powered
off. After the red and blue LED of left headset is powered off, the red
and blue LED light blinks alternately again and enters the mobile
phone matching mode before implementing the relevant operation
in step .
Open the mobile phone's bluetooth function, and find out
the X8 L and click the prompt connecting the relevant
voice in headset in the bluetooth search list of equipment.
3
3
1
2
X8 L
L
Power off
When the left and right headset connects to the mobile
phone, keep long press of any set of headset "on" key for
3 seconds, and two headsets would be powered off at the
same time, in the meantime, the red LED light would power
on for a long time. The headset enters the charging box for
charging, it will also automatically power off.
Auto power-off
Headset will automatically power off without any
connection for 150 seconds.
Notes: The music would automatically suspend when a call comes in
music play for the convenience of your answering/refusal. Once the call
ends or is refused, the music will recover play.
TWS playing music
When headset connects the mobile phone, open the
music play App.
Play/suspend the music by clicking left/right headset
MFB key.
Play the last music by double clicking left ear (L) MFB key.
Play the next music by double clicking right ear (R)
MFB key.
music play App.
Play/suspend the music by clicking left/right headset
MFB key.
Play the last music by double clicking left ear (L) MFB key.
Play the next music by double clicking right ear (R)
MFB key.
1
2
3
3
4
5
Volume up: When listening to music, triple click the left
ear MFB key to achieve the volume plus, and there will be
the "maximum volume" prompt tone when the volume is
added to the maximum value.
Volume down: When listening to music, triple click the
right ear MFB key to achieve the volume minus, and there
will be the "toot" prompt tone when the volume is
decreased to the minimum value.
ear MFB key to achieve the volume plus, and there will be
the "maximum volume" prompt tone when the volume is
added to the maximum value.
Volume down: When listening to music, triple click the
right ear MFB key to achieve the volume minus, and there
will be the "toot" prompt tone when the volume is
decreased to the minimum value.
Answer incoming calls:
Click MFB key under call-in status.
Hang-up call:
Press the multifunction button one time under the call
status, there is "toot" prompt tone.
Refusal call-in:
Keep long press of MFB key for 1 second before release
under call-in, there is "toot" prompt tone.
Click MFB key under call-in status.
Hang-up call:
Press the multifunction button one time under the call
status, there is "toot" prompt tone.
Refusal call-in:
Keep long press of MFB key for 1 second before release
under call-in, there is "toot" prompt tone.
TWS call operation
1
2
3
TWS use
Startup
The first way to boot: Keep long press of Left and right
MFB key for about 2 seconds when the headset is
powered off, then there is "Startup" voice prompt, and
the headset starts and enters the last status, with blue
light blinking.
The second way to boot: The headset could be powered
on upon charging in the charging box and could achieve
mutual automatic connection.
MFB key for about 2 seconds when the headset is
powered off, then there is "Startup" voice prompt, and
the headset starts and enters the last status, with blue
light blinking.
The second way to boot: The headset could be powered
on upon charging in the charging box and could achieve
mutual automatic connection.
1
2
(master headset)
(slave headset)
The reddish blue
LED light blinks
alternately
Blue LED light
blinks every 7 s
econds
L
R
When the reddish blue LED light of left ear blinks
alternately, the blue indicator light of right ear blinks
every 7 seconds, and the headset enters the mobile
phone matching state.
alternately, the blue indicator light of right ear blinks
every 7 seconds, and the headset enters the mobile
phone matching state.
MFB key function
Use of MFB button
Startup
Shutdown
Keep long press for
3 seconds
Keep long press for 3 seconds
Keep long press of MFB
key for 1 second
Double click MFB one time in
stand-by state
Keep long press for
5 seconds
Click one time
Click MFB key one time
Answer calls
Prev song
Next song
Next song
Triple-click left MFB key
Double click left MFB key
Double click right MFB key
Triple click the right
MFB key
Refuse answer calls
Hang up call
Last number re-dial
Open/close voice
control (siri)
Play/Pause
Pairing
Hints
No prompt
There is "toot" prompt tone
There is "toot" prompt tone
There is "toot" prompt tone
There is "toot" prompt tone
There is "toot" prompt tone
There is "toot" prompt tone
There is "toot" prompt tone
There is "toot" prompt tone
The reddish blue LED light
blinks alternately
Blue LED light blinks
Red LED light powers on
for a long time
Keep long press for 2
seconds under shutdown
Volume plus
Volume reduction
There will be the "maximum
volume" prompt tone when
the volume is added to the
maximum value
There will be the "maximum
volume" prompt tone when the
volume is decreased to the
minimum value
Long press MFB key
Restore factory
settings
Red and blue LED lights
are on for 1 second
While charging, press and
hold the left and right
headphones MFB button
for 6 seconds.
How to use the left or right
headphones separately
Left headset: When opening the charging compartment, only
pick up the left headset, the left headset will automatically
turn on, use the phone bluetooth search "X8 L" and click on
the connection pairing.
Right headset: After picking up the right headset, press and
hold the MFB button for 3 seconds to shut down, and then
press the MFB button for 3 seconds to turn on, when the
headset's red and blue lights blink Alternately, use the phone
bluetooth search "X8 R" and click on the connection pairing.
Specification
Notes: The specifications are subject to change without notice.
Headset
Bluetooth version: V5.0
Scope: 10 m / 33 ft
Inputs: 5V
Charging duration: 1.2 hours
Battery capacity: 50 mAh
Play time (depend on different volumes and contents):
3~4 hours(single)
IOS electric quantity display: Support
Double-barrelled function of call: Support
weight:4.7g X 2
Scope: 10 m / 33 ft
Inputs: 5V
Charging duration: 1.2 hours
Battery capacity: 50 mAh
Play time (depend on different volumes and contents):
3~4 hours(single)
IOS electric quantity display: Support
Double-barrelled function of call: Support
weight:4.7g X 2
Charging box
Inputs: 5V 1A
Charging duration: 2.5 hours
Battery capacity: 500 mAh
Charging times of headset: 4-6 times
weight:42.9g X 1
Charging duration: 2.5 hours
Battery capacity: 500 mAh
Charging times of headset: 4-6 times
weight:42.9g X 1
Such label means the product couldn't be discarded as
domestic waste and shall be sent to the corresponding
recycling site. The proper disposal and reclamation are
conducive to protecting the natural resources, human
health and environment. Please contact your local service
sites or sales stores/online store in purchase when
disposing individual privacy information and product
recovery.
The product is designed and manufactured with
high-quality materials and parts, which is recyclable.
Notice
Startup: Voice prompt "startup"
Shutdown: Voice prompt "shutdown"
In bluetooth matching: Voice prompt "enter matching
model"
Bluetooth has been connected: No voice prompt
Bluetooth has been disconnected: Voice prompt
"connection interruption"
Low battery: Voice prompt "low power"
Auto power-off: Voice prompt "shutdown"
Language switching: Voice prompt "corresponding voice"
Low voltage alarm: The red light blinks every 8 seconds
till the low electric quantity, then conduct automatic
shutdown.
Beyond the connection scope: Red light conducts two
quick flashing every 5 seconds, and automatically powers
off after 150 seconds.
No any connection status: Red indicator blinks
Shutdown: Voice prompt "shutdown"
In bluetooth matching: Voice prompt "enter matching
model"
Bluetooth has been connected: No voice prompt
Bluetooth has been disconnected: Voice prompt
"connection interruption"
Low battery: Voice prompt "low power"
Auto power-off: Voice prompt "shutdown"
Language switching: Voice prompt "corresponding voice"
Low voltage alarm: The red light blinks every 8 seconds
till the low electric quantity, then conduct automatic
shutdown.
Beyond the connection scope: Red light conducts two
quick flashing every 5 seconds, and automatically powers
off after 150 seconds.
No any connection status: Red indicator blinks
Related promote
Packing accessories
A pair of headset
One manual
A pair of medium-sized
earmuff
A piece of charging box
One USB charging line
A pair of small-sized earmuff
Headset enters the charging box, and automatically
enters the power-off charging status. Red LED light of
headset is normally on (the red indicator light powers off
after the headset is charged fully).
When the charging line is used to charge the charging
box, the blue indicator light in charging box blinks
progressively. (Four blue indicator lights are normally on
after the charging box is charged fully).
enters the power-off charging status. Red LED light of
headset is normally on (the red indicator light powers off
after the headset is charged fully).
When the charging line is used to charge the charging
box, the blue indicator light in charging box blinks
progressively. (Four blue indicator lights are normally on
after the charging box is charged fully).
Charging operation
1
2
Open the Siri/ other voice control software
Keep long press of any set of headset MFB key for 1 second
under connection status, and there is "toot" prompt tone.
Notes: Such function could be achieved only when the
headset is in stand-by state.
Keep long press of any set of headset MFB key for 1 second
under connection status, and there is "toot" prompt tone.
Notes: Such function could be achieved only when the
headset is in stand-by state.
Siri
Notes: Use the original USB power line to charge your
headset. Please ensure the electricity is charged fully before
the first usage. For the purpose of keeping the battery
service life, please charge fully every 45 days at least
headset. Please ensure the electricity is charged fully before
the first usage. For the purpose of keeping the battery
service life, please charge fully every 45 days at least
4
Last number re-dial:
Double click MFB key one time under
stand-by status, there is "toot" prompt tone.
Double click MFB key one time under
stand-by status, there is "toot" prompt tone.
Language switching
This device supports voice switching:
default Chinese or English.
Specific operation: In the charging state, long press the
MFB button for 3 seconds and then see the blue light is on
for 1 second, and release the MFB button to successfully
switch the language.
Restore factory settings
Operation Steps: While the headset is charging, press and
hold the MFB button of the left and right headphones for
6 seconds, then the red blue light will be on for 1 second
(when you press the 3rd second, the blue light will be on
for 1 second. Please do not release the MFB at this time.
Press the button until the red and blue lights are on
continuously for 1 second)
hold the MFB button of the left and right headphones for
6 seconds, then the red blue light will be on for 1 second
(when you press the 3rd second, the blue light will be on
for 1 second. Please do not release the MFB at this time.
Press the button until the red and blue lights are on
continuously for 1 second)
If the pairing of the left and right headphones fails, you can
put the headset back in the charging box. When the headset
is in the charging state, perform the following operations to
restore the factory settings, and then perform manual pairing.
put the headset back in the charging box. When the headset
is in the charging state, perform the following operations to
restore the factory settings, and then perform manual pairing.
20181220 version:FCC
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged totry to correct the interference by one or
more of the following measures:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged totry to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
party responsible for compliance could void the user's
authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.