Philips Home cinema speakers HTS7111 HTS7111/12 Manuel D’Utilisation
Codes de produits
HTS7111/12
17
English
Play audio from SoundBar
You need to connect an HDMI-CEC device to
the TV and route its audio output from TV to
the SoundBar in order to map the audio of the
connected device to your SoundBar.
1
CTRL on the display (see ‘Setup menu
options and settings’ on page 18).
2
Press
OK.
3
Press the Navigation buttons ( / ) to
select ON, and then press OK.
•
To play the audio from the TV
speakers, select OFF.
4
Press
SETUP repeatedly to select TV
AUDIO on the display panel, and then press
OK.
5
Press the Navigation buttons ( / ) to
select the audio output for each connected
device.
•
HDMI ARC: Audio output through the
HDMI ARC connection.
•
COAX IN: Audio output through the
coaxial connection.
•
OPTI IN: Audio output through the
optical connection.
•
AUX: Audio output through the AUX
connection.
6
Press
OK to confirm.
7
Press
EXIT to exit the menu.
Note
•
(see ‘Option 1: Connect to TV through HDMI
(ARC)’ on page 10).
Control devices
Control the SoundBar and the other connected
HDMI-CEC compliant devices with a single
remote control.
One-touch standby
When you press and hold (Standby) on
the remote control, the SoundBar and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby
mode.
If One-touch standby is enabled on your
SoundBar, you can switch to standby with the
remote control of the TV or other connected
HDMI-CEC devices.
System Audio Control
System Audio Control
You need to connect a device to the TV
and route its audio output from TV to the
SoundBar so that the SoundBar can switch to
the corresponding audio source automatically.
To use one-touch audio, switch on System
Audio Control and map connected devices to
the audio input connectors of the SoundBar.
TV Audio Mapping
TV Audio Mapping
audio input connector (see ‘Play audio from
SoundBar’ on page 17).
One-touch standby
The SoundBar and all connected HDMI-CEC
devices can be switched to standby by a remote
control.
1
STBY on the display panel (see ‘Setup menu
options and settings’ on page 18).
2
Press
OK.
3
Press the Navigation buttons ( / ) to
select ON.
4
Press
OK to confirm.
5
Press
EXIT to exit the menu.
Note
•
To disable One-touch standby, select OFF.
EN