Allan Mark LLC ZULUALPHA Manuel D’Utilisation
When you need to disconnect the speaker
1) Switch off the Bluetooth function on your device, the speaker’s LED will flash blue slowly.
2) Switch off the speaker as mentioned above, the pairing memory will be stored. Next time
1) Switch off the Bluetooth function on your device, the speaker’s LED will flash blue slowly.
2) Switch off the speaker as mentioned above, the pairing memory will be stored. Next time
When you pair the speaker with same device, it will be connected automatically when you switch on the
speaker and the Bluetooth function of the device
speaker and the Bluetooth function of the device
Music Playing
After Bluetooth connection succeed
Play/Pause
Press MFB button to play or pause music. To resume, press MFB button again
After Bluetooth connection succeed
Play/Pause
Press MFB button to play or pause music. To resume, press MFB button again
Track forward
Press and hold Vol + button for about 2 seconds.
Press and hold Vol + button for about 2 seconds.
Track backward
Press and hold Vol – button for about 2 seconds.
Press and hold Vol – button for about 2 seconds.
Volume up
Press the Vol + button once.
Press the Vol + button once.
Volume down
Press the Vol – button once
Press the Vol – button once
Handsfree function
Answer call
To answer a call, press the MFB button once. Music will play again automatically when the call ends.
Answer call
To answer a call, press the MFB button once. Music will play again automatically when the call ends.
End call
Press the MFB button once to end the call.
Press the MFB button once to end the call.
Reject call
Press and hold the MFB button for about 2 seconds.
Press and hold the MFB button for about 2 seconds.
Redial last call
In music playing or standby mode, press the MFB button twice quickly
In music playing or standby mode, press the MFB button twice quickly
Mute /un-Mute
Press and hold vol – button for 2 seconds to mute/un-Mute during a call
Press and hold vol – button for 2 seconds to mute/un-Mute during a call
Voice dial
In standby and music playing mode, press Vol – and Vol + together to activate voice dial function, then say
the contact name you would like to dial.
In standby and music playing mode, press Vol – and Vol + together to activate voice dial function, then say
the contact name you would like to dial.
2nd Incoming Call
To take the 2nd incoming call and end the 1st call, short-pressing the MFB button once.
To take the 2nd incoming call and hold the 1st call, press the MFB for 2 seconds.
To switch between to the 1st call and hold the 2nd call, press the MFB for 2 seconds.
To end the present call and switch to holding call, short-pressing the MFB button once.
To take the 2nd incoming call and end the 1st call, short-pressing the MFB button once.
To take the 2nd incoming call and hold the 1st call, press the MFB for 2 seconds.
To switch between to the 1st call and hold the 2nd call, press the MFB for 2 seconds.
To end the present call and switch to holding call, short-pressing the MFB button once.
Switch between speaker and your phone
During answering or making a phone call via the speaker, press and hold ‘Vol +’for 2 seconds, the call will
switch to your phone. To switch back, press and hold ‘Vol +’for 2 seconds.
During answering or making a phone call via the speaker, press and hold ‘Vol +’for 2 seconds, the call will
switch to your phone. To switch back, press and hold ‘Vol +’for 2 seconds.
Battery display.
When the speaker is connected to an iOS device, the battery level of the speaker will be indicated on the iOS
device’s screen.
Low battery: The red light flashes 1 time per 2.5s for 20 seconds,and this status comes out every 130
seconds, endless loop
When the speaker is connected to an iOS device, the battery level of the speaker will be indicated on the iOS
device’s screen.
Low battery: The red light flashes 1 time per 2.5s for 20 seconds,and this status comes out every 130
seconds, endless loop
Instruction for pairing two mobile phones
1) Pair the first mobile phone (see the steps in ‘Pairing with a Bluetooth enable device’)
2) Then turn off the headset and reboot the device to the pairing mode
1) Pair the first mobile phone (see the steps in ‘Pairing with a Bluetooth enable device’)
2) Then turn off the headset and reboot the device to the pairing mode
。
3) Pair the second mobile phone with same steps. After pairing successes, the speaker is now paired to two
mobile phones, you can play music on either one and answer phone calls from either mobile phone
mobile phones, you can play music on either one and answer phone calls from either mobile phone
LED indicator and Voices Alert
Trouble Shooting
Problem
What to Do
The Speaker is on, but it is not
connecting to my device
connecting to my device
Please switch off the speaker and the Bluetooth function of your
device. Then follow the instruction in the “Pairing Section”
device. Then follow the instruction in the “Pairing Section”
The speaker is connected to
my device, but there is no
sound
my device, but there is no
sound
1. Please make sure that you turn up the volume of both speaker
and your device.
2. Some smart phones/ laptops require you to setup the speaker
as an audio output device before sound is transmitted, please check
the instruction of your device.
3. If you are using a music player or other device, please make sure
it supports A2DP stereo music profile
and your device.
2. Some smart phones/ laptops require you to setup the speaker
as an audio output device before sound is transmitted, please check
the instruction of your device.
3. If you are using a music player or other device, please make sure
it supports A2DP stereo music profile
The sound is not very clear/
the caller cannot hear my voice
the caller cannot hear my voice
1. Keep your smartphone stay close to the speaker.
2. Adjust the volume on your phone and speaker.
3. Make sure there is no source of interference nearby.
4. Make sure the mic on speaker is not covered
2. Adjust the volume on your phone and speaker.
3. Make sure there is no source of interference nearby.
4. Make sure the mic on speaker is not covered
Why the connection is not
stable and cuts out
stable and cuts out
Please make sure there are no objects between the speaker and
your device and make sure no radio or WIFI interference nearby
your device and make sure no radio or WIFI interference nearby
What is the range of speaker?
Wireless speaker have maximum range of 16.4feet(5M) The
actual range will depend on usage and environment. Connection is
usually good with 15-25 feet with no major obstacles between the
devices
actual range will depend on usage and environment. Connection is
usually good with 15-25 feet with no major obstacles between the
devices
My speaker cannot be turn on
Please recharge it and make sure it has enough battery power.
Disclamier
Updates to hardware components are made regularly. Therefore some of the instruction, specifications and
pictures in this documentation may differ slightly from your par ticular situation. All item described in this
guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements
may be obtained from the description made in this manual.
Updates to hardware components are made regularly. Therefore some of the instruction, specifications and
pictures in this documentation may differ slightly from your par ticular situation. All item described in this
guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements
may be obtained from the description made in this manual.
Disposal
As such we urge you to follow the correct disposal procedure for the product, packaging materials and if
applicable, accessories and batteries. This will help conserve natural resources and ensure that the
materials are recycled in a manner that protects health and the environment.
You must follow laws and regulations about disposal. Waste electrical products and batteries must be
disposed of separately from household waste when the product reaches the end of its life. Contact the store
where you bought the product and your local authority to learn about disposal and recycling.
The batteries must be disposed of at your local recycling point. See the operating instructions to find out
how to remove the batteries for disposal.
We apologise for any inconvenience caused by minor inconsistencies in the operating instructions, which
may occur as a result of product improvement and development
As such we urge you to follow the correct disposal procedure for the product, packaging materials and if
applicable, accessories and batteries. This will help conserve natural resources and ensure that the
materials are recycled in a manner that protects health and the environment.
You must follow laws and regulations about disposal. Waste electrical products and batteries must be
disposed of separately from household waste when the product reaches the end of its life. Contact the store
where you bought the product and your local authority to learn about disposal and recycling.
The batteries must be disposed of at your local recycling point. See the operating instructions to find out
how to remove the batteries for disposal.
We apologise for any inconvenience caused by minor inconsistencies in the operating instructions, which
may occur as a result of product improvement and development
The symbol means that the unit complies with European safety and
electrical interference directives
electrical interference directives
certification information need to move away the magnet
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Allan Mark, LLC is under license.
Bluetooth SIG, Inc. and any use of such marks by Allan Mark, LLC is under license.
Declaration of Conformity
The following product has been deemed to comply with the requirements of the listed European Directives: -
RED Directives (2014/53/EU)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Product Description: Bluetooth Speaker
Brand: Zulu Audio
Model numbers: Zulu Alpha 1201,Zulu Alpha 1202
Brand: Zulu Audio
Model numbers: Zulu Alpha 1201,Zulu Alpha 1202
The above listed product conforms to the following EU Standards:
EN 60950-1: 2016+A11:2009+A1:2010 +A12:2011+A2:2013
EN 301 489-1 V2.2.0: 2017-03 (draft)
EN 301 489-17 V3.2.0: 2017-03 (draft)
EN 300 328 V2.1.1
EN 62479: 2010
EN 301 489-1 V2.2.0: 2017-03 (draft)
EN 301 489-17 V3.2.0: 2017-03 (draft)
EN 300 328 V2.1.1
EN 62479: 2010
The person responsible for this declaration is:
Name: Jeff Arias
Position: Managing Partner
Signature:
Name: Jeff Arias
Position: Managing Partner
Signature:
Date:Sep 11th,2017
Function
LED indicator
Voice Alert
Power On
Blue LED light stays for 2
seconds
seconds
Du Du Du Du Tone
Power Off
Red LED light stays for 2
seconds
seconds
Du Du Du Du Tone
Charging
LED shows Red light
Fully Charged
Blue LED light On
Pairing mode
LED flashes Red and Blue
alternately
alternately
Du DuTone
Connection
Success
Success
Blue LED light flashes
quickly
quickly
DuTone
Answer Call
Blue LED light flashes once
every 8 seconds
every 8 seconds
DuTone
Standby (connected
and ready for music)
and ready for music)
Blue LED light flashes twice
every 5 seconds
every 5 seconds
Importer: Allan Mark LLC
7650 Girard Av. Suite 300, 3rd Floor, La Jolla, CA 92037, USA
7650 Girard Av. Suite 300, 3rd Floor, La Jolla, CA 92037, USA