Custom Molded Products CMPB2GC395915 Manuel D’Utilisation

4

4.

LIGHT DOES NOT TURN ON

If the light will not turn on, there may be a bad connection or defective light. Contact technical

support.

5.

AUTOMATIC CLEANING CYCLE

After water is drained from the tub, an automatic cleaning cycle activates system blower (if

equiped). The blower should automatically de-activate after approximately two minutes.

6.

PUMP DOES NOT TURN ON

a. Check water level.

b. Pump will not engage without a sufficient water level.

7.

BLOWER DOES NOT TURN ON

Check electrical connections to the Blower.

8.

SYSTEM TURNS OFF DURING USE

a. Check timer settings. Default system timer is 20 minutes.

b. Check for loss of power

1.

LOW WATER LEVEL / NO WATER

If water level is too low, system will not activate and display

will show “low water level” icon.

2.

CHECK PROGRAM SETTINGS

To check the current control program, power ON. The

current control program will be displayed on the screen.

3.

“TOO HOT” ERROR

If water temp exceeds 111°F the screen will display the

message “Too Hot” and the system will shut down

completely.

3. FAQ & TROUBLESHOOTING